Serviceline Industrial Sensors
Serviceline Explosion Protection

WIS module primary NDP-KE2-8E2-FP

NDP-KE2-8E2-FP
  • 8 channels
  • 9 outputs
  • LEDs for display of the output states and communication
  • Deactivation option
  • Housing with removable terminals
  • DIN rail mounting
  • For connection of 1 transmitter head
  • Can only be used in conjunction with NDP20-FP series WIS transmitter

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  NDP-KE2-8E2-FP

Product Description
Inductive transmitter system
Nominal ratings
Operating voltage24 V DC ± 10 %
Number of signal channels8
Signal transfer directionfrom secondary side to primary side
Reverse polarity protectionreverse polarity protected
Current consumptionmax. 1000 mA
Functional safety related parameters
MTTFd245 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Switching state8 x LED, yellow
Transfer indicatorLED, green
Input
Number1
Input typeActivation input
signal level: ≥ 15 V = active, ≤ 3 V inactive
Input current≤ 1 mA
Internal resistor≥ 15 kΩ
Output
Output type1 Status output (high with proper transfer) and 8 Switch outputs PNP, NO. (switched high) , overload and short-circuit resistant
Voltage drop≤ 2.5 V
Load currentmax. 50 mA
Response time≤ 200 ms ( static operation , the transmission heads stand opposite to each other )
Compliance with standards and directives
Directive conformity
EMC Directive 89/336/EECEN 61000-6-2:2001, EN 61000-6-4:2001, EN 50295:1999
Standard conformity
StandardsEN IEC 60947-5-2
Approvals and certificates
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature0 ... 50 °C (32 ... 122 °F)
Storage temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Degree of protectionIP20
Material
HousingPA 66-FR
InstallationDIN rail mounting
Mass106 g
General information
NoteMaximum cable length between WIS module and WIS transmitter must not exceed 5 m.

Classifications

SystemClasscode
ECLASS 13.027274090
ECLASS 12.027274090
ECLASS 11.027270190
ECLASS 10.0.127270190
ECLASS 9.027270190
ECLASS 8.027270190
ECLASS 5.127270190
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NDP-KE2-8E2-FP

Informative Literature: NDP-KE2-8E2-FP

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - Non-Contact, Wear-Free Signal and Power TransmissionENGPDF314 KB

Design / Simulation: NDP-KE2-8E2-FP

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP4237 KB
CAD Portal / CAD PortalALLLINK---
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ27 KB

Associated Products: NDP-KE2-8E2-FP

Matching System Components
fa
fa
fa