| Product Description |
| Retroreflective sensor for detecting clear glass, M18 threaded housing design, plastic housing, front optical face, 2.5 m detection range, red light, light ON, DC version, NPN output, M12 plug |
| General specifications |
| Effective detection range | 0 ... 2.5 m in glass mode; 0 ... 5 m in normal mode |
| Threshold detection range | 6.5 m |
| Light source | LED |
| Light type | modulated visible red light , 640 nm |
| Diameter of the light spot | approx. 370 mm at 6.5 m ; 50 mm at 1 m |
| Angle of divergence | approx. 2 ° |
| Functional safety related parameters |
| MTTFd | 1260 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | LED yellow: In retro-reflective mode: Lights up when light beam is free; flashing if signal is short of function reserve, off when light beam is interrupted In glass-mode: Lights up when light beam is free; flashing if further compensation is impossible; off when light beam is interrupted |
| Controls | potentiometer for Teach-In and Mode selection |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Output |
| Switching type | light on |
| Signal output | 1 NPN, short-circuit protected open collector |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
| Mechanical specifications |
| Protection degree | IP67 |
| Connection | Connector M12 x 1, 3-pin |