Home > Products > Software > PACTware

FDT-Framework
PACTware 4.X



Serviceline Information


  • Universal DTM host platform
  • For all DTMs of Pepperl+Fuchs
  • Approved FDT/DTM technology
  • Free of charge
  • Internet download possible

Datasheet as PDF in following languages:

ENG
DEU

Technical Data: PACTware 4.X

Product Description
FDT-Framework
Interface
Connectionadapter with RS 232 interface K-ADP1 or USB interface K-ADP-USB (for K-System)
adapter for gateways with RS 232 intrface K-ADP2 (for RPI-System)
adapter for gateways with RS 485 interface K-ADP4 (for RPI-System)
USB/RS 485 interface converter (for LB-System)
Software
Hardware requirementsPACTware requires 50 MBytes hard drive memory and a minimum of 40 MBytes main memory. Depending on the complexity of the projects and the DTMs used, the main memory requirement can be greater. A computer with a Pentium IV 450 MHz processor or better is recommended, XGA graphics, and a Microsoft-compatible mouse or equivalent pointing device arealso required.
Software requirementsPACTware runs in operating systems Windows XP/Vista/7. The software .NET Framework 2.0 must be installed. For printing and online help, MS Internet-Explorer 4.0 or higher is required
LanguagesGerman, English, French, Spanish, Russian can be selected
LicensingPACTware does not require licensing. Please take the license conditions of the DTMs out of the data sheets of the corresponding DTMs.
InstallationUnder Windows XP/Vista/W7 administrator rights are required.
Configuration
Representation of the system configurationGraphic representation of all communication and device DTMs in the tree structure. In case of online operation colour code for identification of defective units and simulation operation. Multiple windows can be open simultaneously. It is therefore possible to view the set device parameters, to monitor the measurement value and to display the device diagnostic simultaneously.
System planning, application processingGeneration of a configuration by means of a graphical application processing menu. Editing of available projects. Selection switch markings for each channel. Offline configuration, saving of project data to hard disk or disk. Automatic comparison of the project plan to the actual available system when establishing connections on the device and parameter levels.
Associated productsCD-ROM with PACTware and complete DTM-Collection of all available DTMs of the Pepperl+Fuchs H-, K-, and E-System devices, HART Multiplexers, Remote I/O-Systems, FieldConnex devices, WirelessHART devices and level devices.

Documents: PACTware 4.X

Instructions, Short instructions, Safety informationLanguageFile TypeFile Size
Qick Installation Guide PACTware and DTM Collection Interface TechnologyENGPDF4413 KB
Configuration de l'interface conventionnelle de collection de DTMFRAPDF757 KB
Kurzanleitung PACTware und DTM Collection Interface TechnologyGERPDF4369 KB
Manuals
Installation guide DTM Collection Interface TechnologyENGPDF7359 KB
Installation et configuration de l'interface conventionnelle de collection de DTMFRAPDF6173 KB
Installationsanleitung DTM Collection Interface TechnologyGERPDF7023 KB

Software: PACTware 4.X

Device Type ManagersRelease InfoFile TypeFile Size
PACTware 4.1 SP2/PACTware 4.1 SP24.1.0.36ZIP32114 KB

Associated Products: PACTware 4.X

AccessoriesName
Microsoft .NET Connection Software
Accessory ofName
UDC-18GM50-400-3E0Double sheet sensor
DTM-FC.ADMDiagnostic Manager
DK12-11-IO/92/136Print mark contrast sensor
UC-PROG1Programming adapter
VDM28-8-L-IO/73c/136Distance sensor
IO-Link-Master01-USBIO-Link Master
UC500-L2-E4-V15Ultrasonic sensor
UC2000-L2-E4-V15Ultrasonic sensor
UC4000-L2-E4-V15Ultrasonic sensor
UC500-L2-E5-V15Ultrasonic sensor
UC2000-L2-E5-V15Ultrasonic sensor
UC4000-L2-E5-V15Ultrasonic sensor
UC500-L2-E6-V15Ultrasonic sensor
UC2000-L2-E6-V15Ultrasonic sensor
UC4000-L2-E6-V15Ultrasonic sensor
UC500-L2-E7-V15Ultrasonic sensor
UC2000-L2-E7-V15Ultrasonic sensor
UC4000-L2-E7-V15Ultrasonic sensor
UC2000-L2-U-V15Ultrasonic sensor
UC2000-L2-I-V15Ultrasonic sensor
VDM28-8-L-IO/73c/110/122Distance sensor
VDM28-8-L-IO/115b/136Distance sensor
MLV41-6-IO/98/103Retroreflective sensor
VDM28-8-L-IO/110/115b/122Distance sensor
VDM28-50-R-IO/73c/136Distance sensor
VDM28-50-R-IO/73c/110/122Distance sensor
MLV41-6-IO/92/136Retroreflective sensor
MLV41-6-IO/95/136Retroreflective sensor
MLV41-55-IO/92/136Retroreflective sensor
MLV41-55-IO/98/103Retroreflective sensor
MLV41-55-IO/95/136Retroreflective sensor
LGS8 SerieLight grid
UC500-30GM-IUEP-IO-V15Ultrasonic sensor
UC2000-30GM-IUEP-IO-V15Ultrasonic sensor
UC4000-30GM-IUEP-IO-V15Ultrasonic sensor
UC6000-30GM-IUEP-IO-V15Ultrasonic sensor
UC500-30GM-2EP-IO-V15Ultrasonic sensor
UC2000-30GM-2EP-IO-V15Ultrasonic sensor
UC4000-30GM-2EP-IO-V15Ultrasonic sensor
UC6000-30GM-2EP-IO-V15Ultrasonic sensor
VDM28-15-L-IO/73c/110/122Distance sensor
LGS25 SerieLight grid
LGS50 SerieLight grid
LGS100 SerieLight grid
VDM28-8-L1-IO/73c/110/122Distance sensor
VDM28-50-R1-IO/73c/110/122Distance sensor
VDM28-50-R1-IR-IO/73c/110/122Distance sensor
DK12-11-IO/A/92/136Print mark contrast sensor
DK12-11-IO-Link DTMDTM collection
DK12-11 IODDIODD collection
MLV41-55 IODDIODD collection
MLV41-6 IODDIODD collection
RL31-8-H IODDIODD collection
VDM28 IODDIODD collection
LGS-Serie IODDIODD collection
MLV41-8 IODDIODD collection
UC...-30GM-...-IO IODDIODD collection
MLV41-54-G IODDIODD collection
IO-Link-Master-USB DTMDTM collection
RL31-8-H-800-RT-IO/59/73c/136Diffuse sensor with measurement core technology
DTM Wireless HARTDTM collection
DTM HART Loop converterDTM collection
DTM Interface TechnologyDTM collection
DTM CorrTranCorrosion monitoring
FieldConnex DTMsCollection
DTM HART-MultiplexerDTM collection
Level Control DTMDTM collection
DTM LB/FBDTM collection
DTM Generic HARTUniversal DTM
DTM HART CommCommmunication drivers
DTM Modbus TCPCommmunication drivers
VDM28-IO-Link DTMDTM collection
IODD Interpreter DTMDTM collection
Ultraschall-Sensoren DTMDTM collection
Ultraschall-Sensoren DTM UC...DTM collection
RL31-8-H-800-RT-IO/59/115/136Diffuse sensor with measurement core technology
UDCM-30GM-085-3E3Double plate sensor
UDC-30GM-085-3E3Double material sensor
UDC-18GMA-400-3E3-Y193711Double sheet sensor
UDC-18GMA-400-3E3Double sheet sensor
UDC-18GMA-400-3E1-Y231302Double sheet sensor
UDC-18GMA-400-3E1Double sheet sensor
UDC-18GM50-400-3E3-Y234802Double sheet sensor
UDC-18GM50-400-3E3-Y222564Double sheet sensor
UDC-18GM50-400-3E3Double sheet sensor
UDC-18GM50-400-3E2Double sheet sensor
UDC-18GM50-400-3E1Double sheet sensor
UDC-18GM50-400-3E0-Y204251Double sheet sensor
UDC-18GM50-255S-3E3Double material sensor
UDC-18GM50-255S-3E1Double material sensor
UDC-18GM50-255S-3E0Double material sensor
UDC-18GM50-255-3E3Double sheet sensor
UDC-18GM50-255-3E2-Y223077Double sheet sensor
UDC-18GM50-255-3E1Double sheet sensor
UDC-18GM50-255-3E0-Y206523Double sheet sensor
UDC-18GM50-255-3E0Double sheet sensor
UDC-18GM-400-3E3Double sheet sensor
UDC-18GM-400-3E2Double sheet sensor
UDC-18GM-400-3E1-Y194142Double sheet sensor
UDC-18GM-400-3E1Double sheet sensor
UDC-18GM-400-3E3-Y235849Double sheet sensor
UC500-L2-I-V15Ultrasonic sensor
UC500-L2-U-V15Ultrasonic sensor
DTM-FC.AD*Diagnostic Manager
UC4000-L2-U-V15Ultrasonic sensor
LGS17 SerieLight grid
UC4000-L2-I-V15Ultrasonic sensor


© 2013 All Rights Reserved.
Pepperl+Fuchs GmbH
Lilienthalstraße 200, 68307 Mannheim, Germany
info@de.pepperl-fuchs.com
Phone: +49 621 776-0
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth guarantees continued success, since more than 60 years. Pepperl+Fuchs employs 5,400 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.