Serviceline Information

Free Download: Technology Guide Ultrasonic Sensors

Over 30 years of expertise in ultrasonic sensor technology - download your free multimedia document with animations now!


  • Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 3000
  • Analog current and voltage output
  • Synchronization options
  • Adjustable acoustic power and sensitivity
  • Temperature compensation

Download the complete datasheet as a PDF


Datasheet excerpt: Technical data of UC4000-30GM-IUR2-V15

Product Description
Single head system
General specifications
Sensing range200 ... 4000 mm
Adjustment range240 ... 4000 mm
Unusable area0 ... 200 mm
Standard target plate100 mm x 100 mm
Transducer frequencyapprox. 85 kHz
Response delay145 ms minimum
440 ms factory setting
Indicators/operating means
LED greensolid: Power-on
flashing: Standby mode or program function object detected
LED yellow 1solid: object in evaluation range
flashing: program function
LED yellow 2solid: object in detection range
flashing: program function
LED redsolid: temperature/program plug not connected
flashing: fault or program function object not detected
Temperature/TEACH-IN connectorTemperature compensation , Evaluation range programming , output function setting
Electrical specifications
Operating voltage10 ... 30 V DC , ripple 10 %SS
Power consumption≤ 900 mW
Interface
Interface type RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit
Input/Output
Synchronizationbi-directional
0 level -UB...+1 V
1 level: +4 V...+UB
input impedance: > 12 KOhm
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms
Synchronization frequency
Common mode operationmax. 13 Hz
Multiplex operation≤ 13 Hz / n , n = number of sensors , n ≤ 5
Output
Output type1 current output 4 ... 20 mA
1 voltage output 0 ... 10 V
Resolutionevaluation range [mm]/4000, but ≥ 0.35 mm
Deviation of the characteristic curve≤ 0.2 % of full-scale value
Repeat accuracy≤ 0.1 % of full-scale value
Load impedancecurrent output: ≤ 500 Ohm
Voltage output: ≥ 1000 Ohm
Temperature influence≤ 2 % from full-scale value (with temperature compensation)
≤ 0.2 %/K (without temperature compensation)
Approvals and certificates
UL approvalcULus Listed, General Purpose
CSA approvalcCSAus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeConnector M12 x 1 , 5-pin
Degree of protectionIP65
Material
Housingstainless steel (1.4305 / AISI 303)
PBT plastic parts
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Mass210 g

Documents: UC4000-30GM-IUR2-V15

Instruction leafletsLanguageFile TypeFile Size
Beipackzettel/Instruction leafletALLPDF662 KB
Instructions, short instructions, safety information
Manual ULTRA2001ENGPDF1494 KB
Handbuch ULTRA2001GERPDF2359 KB

CAD+CAE: UC4000-30GM-IUR2-V15

CADFile TypeFile Size
3D Modell/3D modelIGS74 KB
3D Modell/3D modelSTP47 KB

Approvals+Certificates: UC4000-30GM-IUR2-V15

CertificatesCertificate No.File TypeFile Size
US CA UL General PurposeE87056LINK---
Europe Pepperl+Fuchs 2004/108/EC (EMC) Declaration of ConformityPF 08 CERT 1262PDF357 KB
US CA CSA1007121 (LR96321-2)PDF101 KB

Software: UC4000-30GM-IUR2-V15

Software ToolsRelease InfoFile TypeFile Size
Software ULTRA 3000/Software ULTRA 3000V1.2.9ZIP2793 KB

Associated Products: UC4000-30GM-IUR2-V15

AccessoriesName
BF 30Mounting flange
BF 30-FMounting flange
ULTRA3000Service program
UC-30GM-R2Interface cable
V15-G-2M-PVCFemale connector
V15-W-2M-PURFemale connector