Welcome to Pepperl-Fuchs International!
DART Segment Protector for Cabinet Installation
R3-SP-IBD12
- 12 outputs Ex ib IIC
- Segment Protector in Zone 1
- Instruments in Zone 1
- Short-circuit protection per output
- For FOUNDATION Fieldbus H1 and PROFIBUS PA
- Power, Com, and Error LEDs
- T-connector for easy installation and maintenance
- Test points for easy troubleshooting
Datasheet as PDF in following languages:
Technical Data: R3-SP-IBD12
| Fieldbus interface | ||
| Main cable (Trunk) | ||
| Rated voltage | 14.5 ... 24 V DC | |
| Rated current | max. 4.5 A | |
| Outputs | ||
| Number of outputs | 12 | |
| Number of devices per output | 1 | |
| Rated voltage | min. 10.5 V , max. 24 V | |
| Rated current | max. 34 mA | |
| Short-circuit current | max. 47 mA | |
| Self current consumption | typical 20 mA , max. 25 mA | |
| Voltage drop main cable/outputs | max. 4 V | |
| Voltage drop trunk In/Out | 0 V | |
| Terminating resistor | external type M-FT-IBD 100 Ω +/- 10 % | |
| Indicators/operating means | ||
| LED ERR | red: short-circuit | |
| LED PWR | green: Fieldbus voltage > 10 V | |
| LED COM | yellow: bus activity | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2004/108/EC | EN 61326-1:2006 | |
| Standard conformity | ||
| Electromagnetic compatibility | NE 21:2006 | |
| Protection degree | IEC 60529 | |
| Fieldbus standard | IEC 61158-2 | |
| Shock resistance | EN 60068-2-27 | |
| Vibration resistance | EN 60068-2-6 | |
| Ambient conditions | ||
| Ambient temperature | -40 ... 70 °C (-40 ... 158 °F) | |
| Storage temperature | -50 ... 85 °C (-58 ... 185 °F) | |
| Relative humidity | < 95 % non-condensing | |
| Shock resistance | 15 g 11 ms | |
| Vibration resistance | 1 g , 10 ... 150 Hz | |
| Corrosion resistance | acc. to ISA-S71.04-1985, severity level G3 | |
| Mechanical specifications | ||
| Connection type | removable screw terminals with retaining screws | |
| Core cross-section | max. 2.5 mm2 /AWG 12-24 | |
| Housing material | Polycarbonate | |
| Protection degree | IP20 | |
| Mass | 250 g | |
| Dimensions | see dimensions | |
| Mounting | DIN mounting rail , according to DIN EN 60715 | |
| Data for application in connection with Ex-areas | ||
| EC-Type Examination Certificate | PTB 10 ATEX 2034 , PTB 10 ATEX 2018X | |
| Group, category, type of protection, temperature class |  II 2G Ex ib IIC T4 , II (2)D [Ex ib] IIIC |
|
| Main cable (Trunk) | for connection to the DART Fieldbus System acc. to System Certificate PTB 10 ATEX 2034 | |
| Outputs | Entity | |
| Voltage | 23 V | |
| Current | 47 mA | |
| Power | 1.08 W | |
| Inductance | gas group IIC 170 µH gas group IIB 1 mH |
|
| Capacitance | gas group IIC 60 nF gas group IIB 470 nF |
|
| Directive conformity | ||
| Directive 94/9/EC | EN 60079-0:2009 , EN 60079-11:2007 , EN 61241-11:2006 | |
| International approvals | ||
| IECEx approval | IECEx PTB 12.0024X IECEx PTB 12.0021X | |
| Approved for | Ex ib IIC T4 [Ex ib] IIIC |
|
| Certificates and approvals | ||
| FOUNDATION Fieldbus | FF-846 | |
| Marine approval | pending | |
CAD+CAE: R3-SP-IBD12
| CAD | File Type | File Size |
| Abmessungszeichnung 2D (DXF)/Dimension drawing 2D (DXF) | ZIP | 925 KB |
Approvals+Certificates: R3-SP-IBD12
| Certificates | Certificate No. | File Type | File Size |
| Europe PTB ATEX | PTB 10 ATEX 2018X | 656 KB | |
| Worldwide Fieldbus Foundation | DC070901 | LINK | --- |
| Europe Pepperl+Fuchs ATEX Declaration of Conformity | PF 12 CERT 2276 | 91 KB | |
| Europe PTB II 2 G II (2) G II 3 (2) G II 3 G ATEX | PTB 10 ATEX 2034 | 894 KB | |
| PTB IECEx Certificate of Conformity | IECEx PTB 12.0024 | LINK | --- |
Associated Products: R3-SP-IBD12
| Matching system components | Name |
| KT-MB-FB-D-4R | DART High-Density Power Hub, Common Interface |
| KT-MB-FB-D-4R.GEN | DART High-Density Power Hub, Generic Interface |
| KT-MB-FB-D-4R.YO | DART High-Density Power Hub for Yokogawa ALF 111 |
| KT-MB-GTB-D-2PS | DART Compact PROFIBUS Power Hub and Segment Coupler |