| Product Description |
| Background suppression sensor |
| General specifications |
| Detection range | 7 ... 20 mm |
| Light source | LED |
| Light type | modulated visible red light , 660 nm |
| Black/White difference (6 %/90 %) | approx. 1 mm |
| Diameter of the light spot | approx. 1.5 mm at 20 mm |
| Angle of divergence | approx. 5 ° |
| Functional safety related parameters |
| MTTFd | 1940 a |
| Mission Time (TM) | 20 a |
| Diagnostic Coverage (DC) | 0 % |
| Indicators/operating means |
| Function display | LED yellow: lights when object is detected |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Output |
| Switching type | light/dark on electrically switchable |
| Signal output | Push-pull output, short-circuit protected, reverse polarity protected |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Shock and impact resistance | IEC / EN 60068. half-sine, 40 g in each X, Y and Z directions |
| Vibration resistance | IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions |
| Mechanical specifications |
| Protection degree | IP67 / IP69K |
| Connection | 300 mm fixed cable with M12 x 1, 4-pin connector |
| Material | |
| Cable | PUR |
