Thru-beam sensor
E18-LAS/EV18-LAS/25/32/76a/92

Product Description
Laser thru-beam sensor
System components
Emitter		E18-LAS/92
Receiver		EV18-LAS/32/92
General specifications
Effective detection range		0 ... 10 m
Threshold detection range		18 m
Light source		laser diode
Light type		modulated visible red light
Laser nominal ratings
	Laser class	1
	Wave length	650 nm
Target size		1.2 mm
Light receiver		photo diode
Diameter of the light spot		approx. 1.5 mm at detection range 1.5 m
Angle of divergence		Receiver +/-2°
Functional safety related parameters
MTTF_d		208.3 a
Mission Time (T_M)		7 a
Diagnostic Coverage (DC)		60 %
Indicators/operating means
Function display		LED yellow, lights up when light beam is free, flashes when falling short of the stability control
Electrical specifications
Operating voltage		10 ... 30 V DC
Output
Switching type		light on
Signal output		1 PNP, short-circuit protected, open collector
Compliance with standards and directives
Directive conformity
	EMC Directive 2004/108/EC	EN 60947-5-2:2007
Standard conformity
	Product standard	EN 60947-5-2:2007 IEC 60947-5-2:2007
	Shock and impact resistance	IEC / EN 60068, half-sine, 30 g in X, Y and Z direction
	Vibration resistance	IEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
	Laser class	IEC 60825-1:2007 EN 60825-1:2007
Mechanical specifications
Protection degree		IP65
Connection		connector M12 x 1, 4-pin

Instruction leaflets	Language	File Type	File Size
Beipackzettel/Instruction leaflet	ALL	PDF	395 KB
Technical information
Beipackzettel Laser/Leaflet laser	ALL	PDF	325 KB

Certificates	Certificate No.	File Type	File Size
EU Pepperl+Fuchs	PF08CERT1242	PDF	442 KB

Thru-beam sensorE18-LAS/EV18-LAS/25/32/76a/92