Serviceline Industrial Sensors
Ask an Expert
Serviceline Explosion Protection
Ask an Expert
Industrial Sensors

Inductive sensor NJ1,5-18GM-N-D-V1-Y29033

NJ1,5-18GM-N-D-V1-Y29033
  • 1.5 mm flush
  • Compression proof up to 350 bar, dynamic on active surface


NAMUR sensors must be operated with approved switch amplifiers. Please find suitable devices below:

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Datasheet excerpt: Technical data of  NJ1,5-18GM-N-D-V1-Y29033

General specifications
Switching functionNormally closed (NC)
Output typeNAMUR
Rated operating distance1.5 mm
Installationflush
Assured operating distance0 ... 1.22 mm
Reduction factor rAl 0
Reduction factor rCu 0
Reduction factor r304 0.55
Output type2-wire
Nominal ratings
Nominal voltage8 V
Switching frequency0 ... 400 Hz
Hysteresistyp. %
Current consumption
Measuring plate not detectedmin. 3 mA
Measuring plate detected≤ 1 mA
Limit data
Operating pressure350 bar (5076.4 psi)
Compliance with standards and directives
Standard conformity
NAMUREN 60947-5-6:2000
IEC 60947-5-6:1999
StandardsEN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
IECEx approval
Equipment protection level GbIECEx PTB 11.0037X
Equipment protection level DaIECEx PTB 11.0037X
Equipment protection level MbIECEx PTB 11.0037X
ATEX approval
Equipment protection level GbPTB 00 ATEX 2048 X
Equipment protection level DaPTB 00 ATEX 2048 X
UL approvalcULus Listed, Class 2 Power Source
CML approvalon request
Ambient conditions
Ambient temperature-25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type4-pin, M12 x 1 connector
Housing materialStainless steel 1.4305 / AISI 303
Sensing faceCeramic
Degree of protectionIP67
Dimensions
Length35 mm
Diameter18 mm
General information
Use in the hazardous areasee instruction manuals

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NJ1,5-18GM-N-D-V1-Y29033

Documents: NJ1,5-18GM-N-D-V1-Y29033

Instruction manualsFile TypeFile Size
ИнструкцииPDF185 KB
Návod k poużitíPDF178 KB
Instruktions manualPDF176 KB
Instruction manualPDF178 KB
KasutusjuhendPDF171 KB
KäyttöohjePDF171 KB
Manuel d'instructionsPDF180 KB
BetriebsanleitungPDF178 KB
Οδηγίες χρήσηςPDF188 KB
HandleidingPDF177 KB
Instruction manual / BetriebsanleitungPDF176 KB
Használati útmutatóPDF180 KB
Manuale di istruzioniPDF178 KB
Lietošanas pamācībaPDF176 KB
Instrukciju vadovasPDF178 KB
Instrukcja obsługiPDF239 KB
Manual de instruçõesPDF180 KB
Manual de utilizarePDF179 KB
Návod na poużitiePDF178 KB
Navodila za uporaboPDF175 KB
Manual de instruccionesPDF180 KB
ManualPDF175 KB
Technical information
Installation conditionsPDF1054 KB
EinbaubedingungenPDF1060 KB

Approvals+Certificates: NJ1,5-18GM-N-D-V1-Y29033

CertificatesFile TypeFile Size
Canada USA UL Ordinary LocationPDF288 KB
EU PTB ATEX ia 2G, 1G, 1D s. certificatePDF12880 KB
Japan CML Ex iaPDF307 KB
Worldwide PTB IECEx iaLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)PDF1238 KB
UK Declaration of Conformity (P+F)PDF1231 KB
General Notes Relating to Pepperl+Fuchs Product Information

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.

Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
phone +61 3 9358 3400

© 2024 All Rights Reserved.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.