Fieldbus Power Hub, Advanced Diagnostic Module HD2-DM-A

Comprehensive diagnostics for fieldbus physical layer and power supply
Plug-in Module for the FieldConnex Power Hub
Precise measurements through passive circuits
For commissioning, online monitoring and troubleshooting
For FOUNDATION Fieldbus H1 and PROFIBUS PA
Installation in Zone 2/Class I, Div. 2
System state and fault indication via LEDs
Display of data in the safety of the control room
Automatic setup of diagnostic system
Full software integration into PCS and PAM possible

Technical Data
Details
Informative Literature
Product Documentation
Approvals
Software
Associated Products
Ask an Expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:

Datasheet excerpt: Technical data of HD2-DM-A

General specifications
Design / Mounting		Motherboard based
Supply
Rated voltage		19.2 ... 35 V
Rated current		110 ... 30 mA
Power dissipation		max. 2 W
Fieldbus connection
Number of segments		4
Fieldbus type		FOUNDATION Fieldbus/PROFIBUS PA
Rated voltage		9 ... 32 V
Indicators/operating means
LED PRI PWR		green: on, primary bulk power supply connected
LED SEC PWR		green: on, secondary bulk power supply connected
LED Seg 1...4		yellow: bus activity; red 2 Hz flashing: alarm; red: hardware error
Fault signal		VFC alarm 1 A, 50 V DC, normally closed
DIP switch		diagnostic address 1...247, binary coded
Interface
Interface type		diagnostic bus: RS 485
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Fieldbus segment/Supply		functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013
Standard conformity
Electromagnetic compatibility		NE 21:2011
Degree of protection		IEC 60529
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 70 °C (-40 ... 158 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Pollution degree		max. 2, according to IEC 60664
Corrosion resistance		acc. to ISA-S71.04-1985, severity level G3
Mechanical specifications
Connection type		motherboard specific
Core cross section		motherboard specific
Housing material		Polycarbonate
Degree of protection		IP20
Mass		approx. 100 g
Dimensions
	Height	106 mm
	Width	18 mm
	Depth	128 mm
Mounting		motherboard mounting
Mating cycles		100
Data for application in connection with hazardous areas
Certificate		TÜV 04 ATEX 2500 X
	Marking	II 3 G Ex nA IIC T4 Gc
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
FM approval
	FM certificate	FM 19 US 0015 X and FM 19 CA 0011 X
	FM marking	AEx/Ex ec IIC T4
IECEx approval
	IECEx certificate	IECEx TUN 13.0038X
	IECEx marking	Ex nA IIC T4 Gc
Certificates and approvals
Marine approval		DNV A-14038
Patents		This product may be covered by the following patent: US7,698,103
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242692
ECLASS 12.0	27242692
ECLASS 11.0	27242692
ECLASS 10.0.1	27242692
ECLASS 9.0	27242692
ECLASS 8.0	27242692
ECLASS 5.1	27242692
ETIM 9.0	EC001604
ETIM 8.0	EC001604
ETIM 7.0	EC001604
ETIM 6.0	EC001604
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: HD2-DM-A

Function

Designed as a plug-in module for the FieldConnex® Power Hub, this Advanced Diagnostic Module (ADM) is a comprehensive measurement tool for the physical layer of up to four fieldbus segments. It's passive input circuits leave the physical layer untouched for exact data. The ADM detects gradual or sudden changes and helps trace even intermittent malfunctions.

The ADM supports commissioning, online monitoring and troubleshooting. It can be integrated tightly into the DCS and PAM via a separate diagnostic bus, making the fieldbus physical layer itself a managable asset. Configuration tools automate setup of the ADM and of selected DCS.

The Diagnostic Manager is the software for display and operation from the safety of the control room. The Professional Edition provides powerful functions and wizards simplifying and automating work procedures: an embedded expert system, a data historian, and a built-in oscilloscope (see datasheet DTM-FC.AD*).

Informative Literature: HD2-DM-A

Literature	Language	File Type	File Size
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB
Application Report - Fieldbus Power Supply Compatible with Process Industry Applications	ENG	PDF	229 KB

Product Documentation: HD2-DM-A

Product information	Language	File Type	File Size
Technical Information Advanced Diagnostic with Yokogawa Plant Resource Manager (PRM)	ENG	PDF	2551 KB
Safety and Security Documentation
Instruction manual	ENG	PDF	224 KB
Manuals
Manual	ENG	PDF	25397 KB

Approvals: HD2-DM-A

Certificates	Cert No.	Language	File Type	File Size
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
China SITIIAS CCC	2020322310003510 (Singapore)	ALL	PDF	1330 KB
DNV Marine	TAA0000272	ALL	PDF	100 KB
Europe TUV Nord ATEX Category 3 G	TÜV 04 ATEX 2500X	ALL	PDF	1498 KB
India PESO (India) CCOE	A/P/HQ/KA/104/5874 (P507650)	ALL	PDF	101 KB
USA FM	FM 19 US 0015X	ALL	PDF	213 KB
Worldwide TUV Nord Ex nA nC IECEx nA	IECEx TUN 13.0038X	ALL	LINK	---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0756C	ALL	PDF	1040 KB

Software: HD2-DM-A

Software Tools	Release Info	File Type	File Size
Diagnostic Manager / Diagnostic Manager	2.2.4.3610	ZIP	87499 KB

Associated Products: HD2-DM-A

Matching System Components

	KT-MB-GT2AD.FF Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface
	System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Common alarm handling, For FOUNDATION Fieldbus and PROFIBUS PA, International, Europepa

	KT-MB-GT2AD.FF.IO Advanced Diagnostic Gateway with Ethernet and FF-H1 Interface and I/O
	System integration kit for Advanced Diagnostics, PCS integration via Diagnostic Manager or device DTM, Simple automatic setup of Advanced Diagnostics, Alarm handling and integrated I/O for cabinet monitoring/control, For FOUNDATION Fieldbus and PROFIBUS PA, International, Europe, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors
	4 segments, individual modules per segment, Customizable cable connections to any PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4R.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors
	4 segments, redundant, individual modules per segment, Customizable cable connections to any PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-8R.HSC* Compact Fieldbus Power Hub Motherboard with Host System Connectors
	8 segments, redundant, individual modules per segment, Supports all PLC and PCS hosts, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	MBHC-FB-4.GT* Fieldbus Power Hub, Motherboard for Gateway and Power Supply Modules
	4 segments, simplex, individual modules per segment, For PROFIBUS PA, For gateway and power supply modules, High-power trunk: Live work on devices in any hazardous area, Optional advanced diagnostics, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

Matching System Components

	FBTA-228-BPFB-R-8R Compact Fieldbus Power Hub Motherboard for Invensys FBM 228
	8 segments, redundant, individual modules per segment, Customized for Invensys, FBM228, High-power trunk: Live work on devices in any hazardous area, Best quality, smallest size and lowest heat dissipation, For FOUNDATION Fieldbus H1, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	KT-MB-DMA Advanced Diagnostic Module, Kit for Stand-Alone Operation
	Comprehensive diagnostics for the fieldbus physical layer, Module and motherboard for retrofit of any installation, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

Accessories

	DTM-FC.AD* Diagnostic Manager Software
	Software user interface for Advanced Diagnostic Modules, Simultaneous access to all ADMs of a plant, Embedded expert system gives pointed advice in clear text, Includes Commissioning Wizard, data historian, oscilloscope..., For FOUNDATION Fieldbus H1 and PROFIBUS PA, Automatic setup of diagnostic systempa

	PACTware 4.1 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Internet download possiblepa

	PACTware 5.0 FDT Framework
	Universal DTM host platform, For all DTMs of Pepperl+Fuchs, Approved FDT/DTM technology, Free of charge, Download from Pepperl+Fuchs websitepa

General Notes Relating to Pepperl+Fuchs Product Information

Quick Links

Ethernet-APL for Process Industries

Ethernet-APL enables continuous communication across all hierarchy levels. Learn more about the pioneering technology …

RSS Info Service for PANOS Updates

Stay informed when a new software update of PANOS, the operating system for Ethernet-APL switches, is released: With our RSS Feed you will get an email notfication in your inbox immediately after an update has been released.

FieldConnex®—Fieldbus Made Easy

From decisions to planning, installation, and commissioning up to operation and maintenance: Discover how to make the most out of your fieldbus infrastructure …

Technologies

Fieldbus in the Safe or Any Hazardous Area

Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
phone +61 3 9358 3400

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.