Temperature Converter HiD2062
- 2-channel isolated barrier
- 24 V DC supply (bus powered)
- Thermocouple or mV inputs
- Output 4 mA ... 20 mA
- Sensor breakage detection
- Simple span and zero selection
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of HiD2062
| General specifications | ||
|---|---|---|
| Signal type | Analog input | |
| Supply | ||
| Connection | SL1: 1a(-), 1b(-); 2a(+), 2b(+) | |
| Rated voltage | 20.4 ... 30 V DC bus powered via Termination Board | |
| Rated current | 30 mA at 24 V, 20 mA output (per channel) | |
| Power dissipation | 0.6 W at 24 V (per channel) | |
| Input | ||
| Connection side | field side | |
| Connection | SL2: 5a(+), 7a(-); 1a(+), 1b(-): thermocouples type E, J, K, N, R, S, T 5a(+), 7b(-); 1a(+), 3b(-): thermocouple type B and mV input 5b(+), 7b(-); 3a(+), 3b(-): cold junction compensation (CJC) |
|
| Thermocouples | type B, E, J, K, N, R, S, T (IEC 584-1), type L (GOST) | |
| Cold junction compensation | at field terminals | |
| Measurement range | -10 ... 100 mV | |
| Span | 2.6 ... 100 mV | |
| Zero suppression | ± 500 % of span | |
| Line fault detection | sensor burnout 25 nA, upscale or downscale (selectable) | |
| Output | ||
| Connection side | control side | |
| Connection | SL1: 8a(+), 7a(-); 10a(+), 9a(-) | |
| Load | 0 ... 650 Ω | |
| Output signal | 4 ... 20 mA or 1 ... 5 V (on 250 Ω, 0.1 % internal shunt) | |
| Ripple | 10 mVrms (at load 250 Ω) | |
| Transfer characteristics | ||
| Accuracy | < ± 0.1 % of full-scale value (current output) | |
| Influence of temperature | < ± 0.01 %/K on zero and span | |
| Influence of load | < ± 0.1 % of full-scale value from 0 ... 650 Ω | |
| Rise time/fall time | typ. 150 ms | |
| Linearity | < ± 0.1 % of full-scale value (terminal based mV input to mA output of thermocouples) | |
| Compensation error | ± 0.5 K ± 0.05 K deviation from reference of 20 °C (68 °F) | |
| Galvanic isolation | ||
| Output/power supply | none | |
| Indicators/settings | ||
| Display elements | LED | |
| Control elements | DIP switch potentiometer |
|
| Factory setting | 4 ... 20 mA, thermocouple type K, 0 ... 500 °C (273 ... 773 K), upscale burnout | |
| Configuration | via DIP switches via potentiometer |
|
| Labeling | space for labeling at the front | |
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 (industrial locations) | |
| Conformity | ||
| Electromagnetic compatibility | NE 21:2006 For further information see system description. |
|
| Degree of protection | IEC 60529 | |
| Ambient conditions | ||
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) | |
| Relative humidity | 5 ... 90 %, non-condensing up to 35 °C (95 °F) | |
| Mechanical specifications | ||
| Degree of protection | IP20 | |
| Mass | approx. 140 g | |
| Dimensions | 18 x 106 x 128 mm (0.7 x 4.2 x 5 inch) | |
| Height | 106 mm | |
| Width | 18 mm | |
| Length | 128 mm | |
| Mounting | on termination board | |
| Coding | pin 1 and 2 trimmed For further information see system description. |
|
| Data for application in connection with hazardous areas | ||
| EU-type examination certificate | CESI 02 ATEX 086 | |
| Marking |  II (1)G [Ex ia Ga] IIC II (1)D [Ex ia Da] IIIC |
|
| Input | Ex ia, Ex iaD | |
| Voltage | 13.2 V | |
| Current | 20 mA | |
| Power | 66 mW | |
| Supply | ||
| Maximum safe voltage | 250 V AC (Attention! Um is no rated voltage.) | |
| Certificate | PF 11 CERT 2109 X | |
| Marking | II 3G Ex nA IIC T4 Gc [device in zone 2] |
|
| Galvanic isolation | ||
| Input/input | safe electrical isolation acc. to EN 60079-11:2007, voltage peak value 60 V | |
| Input/Output | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V | |
| Input/power supply | safe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V | |
| Directive conformity | ||
| Directive 2014/34/EU | EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010 | |
| International approvals | ||
| CSA approval | ||
| Control drawing | 366-005CS-12B (cCSAus) | |
| IECEx approval | IECEx TUN 04.0012 | |
| Approved for | [Ex ia] IIC | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27210129 |
| ECLASS 12.0 | 27210129 |
| ECLASS 11.0 | 27210129 |
| ECLASS 10.0.1 | 27210129 |
| ECLASS 9.0 | 27210129 |
| ECLASS 8.0 | 27210190 |
| ECLASS 5.1 | 27210107 |
| ETIM 9.0 | EC002919 |
| ETIM 8.0 | EC002919 |
| ETIM 7.0 | EC002919 |
| ETIM 6.0 | EC002919 |
| ETIM 5.0 | EC001485 |
| UNSPSC 12.1 | 32101514 |
Details: HiD2062
Function
This isolated barrier is used for intrinsic safety applications. It is a temperature converter that accepts thermocouple or mV input signals from a hazardous area and converts them to an isolated analog current signal in the safe area.
Input type, range, and error handling parameters are configurable by DIP switches and potentiometers.
Each module is supplied with a cold junction compensator (CJC), which is mounted on the screw terminals of the Termination Board.
The outputs are isolated from the inputs and are referenced to the power supply common.
This module mounts on a HiD Termination Board.
Product Documentation: HiD2062
| Brief Instructions | Language | File Type | File Size |
|---|---|---|---|
| Operating instructions HiD206* | ENG | 612 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 168 KB | |
| Manuals | |||
| System Manual | ENG | 5438 KB | |
Design / Simulation: HiD2062
| CAD | Language | File Type | File Size |
|---|---|---|---|
| CAD 2-D / CAD 2-D | ALL | ZIP | 16364 KB |
| CAE | |||
| EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA) | ALL | ZIP | 3536 KB |
Approvals: HiD2062
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Canada, USA CSA | CoC 70001345 | ALL | 136 KB | |
| Europe CESI ATEX Category (1) D ATEX Category (1) G | CESI 02 ATEX 086 | ALL | 3887 KB | |
| Europe Pepperl+Fuchs ATEX Category 3 G | PF 11 CERT 2109 X | ALL | 446 KB | |
| TUV Nord IECEx Certificate of Conformity | IECEx TUN 04.0012 | ALL | LINK | --- |
| Control Drawings | ||||
| Control drawing CSA / Control drawing CSA | ALL | 98 KB | ||
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-0779B | ALL | 50 KB | |
Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.