Distance sensor VDM100-150-EIP/G2
- Measuring method PRT (Pulse Ranging Technology)
- Non-contact precision measurement
- Ultra-fast data acquisition
- Active dynamic control
- Modern lightweight design, extremely robust
- EtherNet/IP
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Datasheet excerpt: Technical data of VDM100-150-EIP/G2
| Product Description |
|---|
| Distance sensor with EtherNet/IP-Interface |
| General specifications | ||
|---|---|---|
| Measurement range | 0.3 ... 150 m | |
| Reference target | Foil reflector 500 mm x 500 mm | |
| Light source | laser diode | |
| Laser nominal ratings | ||
| Note | VISIBLE AND INVISIBLE LASER RADIATION , DO NOT STARE INTO BEAM | |
| Laser class | Measuring laser: 1 Alignment laser: 2 |
|
| Wave length | Measuring laser: 905 nm Alignment laser: 660 nm |
|
| Beam divergence | Measuring laser: 2 mrad Alignment laser: 1 mrad |
|
| Pulse length | Measuring laser: 4 ns | |
| Repetition rate | Measuring laser: 20 kHz | |
| Maximum optical power output | Alignment laser: 0.6 mW | |
| max. pulse energy | Measuring laser: 12 nJ | |
| Measuring method | Pulse Ranging Technology (PRT) | |
| Max. Motion velocity | 15 m/s | |
| Alignment aid | Laser pointer | |
| Life span | > 100000 h | |
| Diameter of the light spot | < 35 cm at 150 m | |
| Ambient light limit | > 100000 Lux | |
| Resolution | 0.1 mm , adjustable | |
| Temperature influence | 0.03 mm/K | |
| Functional safety related parameters | ||
| MTTFd | 120 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Indicators/operating means | ||
| Diagnostics indicator | 3 LEDs connection status: Link, speed, activity | |
| Function indicator | 4 LEDs | |
| Control elements | Control panel (4 membrane keys) for setting parameters status | |
| Parameterization indicator | Illuminated display for displaying measured values and parameterization | |
| Electrical specifications | ||
| Operating voltage | 18 ... 30 V DC | |
| No-load supply current | 250 mA (18 V) ... 150 mA (30 V) | |
| Protection class | III (operating voltage 50 V) | |
| Time delay before availability | < 10 s | |
| Interface | ||
| Interface type | EtherNet/IP | |
| Read out rate | 1000/s @ 100 Mbit/s | |
| Input/Output | ||
| Input/output type | 2 PNP inputs/outputs, independent configuration, short-circuit protected, reverse polarity protected | |
| Input | ||
| Switching threshold | low: Ue < 6 V, high: Ue > 16 V |
|
| Output | ||
| Switching threshold | low: Ua < 1 V, high: Ua > Ub - 1 V |
|
| Switching current | 200 mA per output | |
| Conformity | ||
| Product standard | EN 60947-5-2 | |
| Laser safety | IEC 60825-1:2007 | |
| Measurement accuracy | ||
| Measured value output | 1 ms | |
| Average data age | 3 ms , 6 ms , 12 ms , 25 ms , 50 ms , adjustable | |
| Offset | max. 2 mm (between two devices) | |
| Absolute accuracy | ± 2.5 mm (> 3 m); ± 3.5 mm (0.3 m to 3 m) | |
| Repeat accuracy | < 0.5 mm | |
| Approvals and certificates | ||
| EAC conformity | TR CU 020/2011 | |
| UL approval | cULus Listed, Class 2 Power Source, Type 1 enclosure | |
| FDA approval | IEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007 | |
| Ambient conditions | ||
| Ambient temperature | -10 ... 50 °C (14 ... 122 °F) | |
| Storage temperature | -20 ... 70 °C (-4 ... 158 °F) | |
| Relative humidity | 95 % , no moisture condensation | |
| Mechanical specifications | ||
| Degree of protection | IP65 | |
| Connection | 4-pin, M12x1 connector, standard (supply) , 4-pin, M12x1 socket, D-coded (LAN) , 8-pin, M12x1 connector, service |
|
| Material | ||
| Housing | ABS / PC | |
| Optical face | PMMA , hard coated | |
| Mass | approx. 700 g | |
| Dimensions | ||
| Height | 100 mm | |
| Width | 140 mm | |
| Length | 170 mm | |
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27270916 |
| ECLASS 12.0 | 27270916 |
| ECLASS 11.0 | 27270801 |
| ECLASS 10.0.1 | 27270801 |
| ECLASS 9.0 | 27270801 |
| ECLASS 8.0 | 27270801 |
| ECLASS 5.1 | 27270801 |
| ETIM 9.0 | EC001825 |
| ETIM 8.0 | EC001825 |
| ETIM 7.0 | EC001825 |
| ETIM 6.0 | EC001825 |
| ETIM 5.0 | EC001825 |
| UNSPSC 12.1 | 41111613 |
Details: VDM100-150-EIP/G2
Series VDM 100 laser distance measurement devices are designed for high distances. They have a repeat accuracy of 0.5 mm. SSI and fieldbusses are used as value interfaces.
These devices are used for precise positioning of rack operating units, gantry cranes, railbound vehicles, elevators and other linear movable units.
Datasheet: VDM100-150-EIP/G2
| Datasheet | File Type | File Size |
|---|---|---|
| Datasheet VDM100-150-EIP/G2 | 1012 KB | |
| Fiche de données VDM100-150-EIP/G2 | 1017 KB | |
| Datenblatt VDM100-150-EIP/G2 | 1012 KB | |
| Hoja de datos VDM100-150-EIP/G2 | 1017 KB |
Documents: VDM100-150-EIP/G2
| Manuals | File Type | File Size |
|---|---|---|
| Manual VDM100/G2 | 3919 KB | |
| Handbuch VDM100/G2 | 5701 KB | |
| Short instructions, safety information | ||
| Brief Instructions - VDM100/G2 | 4210 KB | |
| Kurzanleitung - VDM100/G2 | 747 KB |
CAD+CAE: VDM100-150-EIP/G2
| CAD | File Type | File Size |
|---|---|---|
| CAD 3-D / CAD 3-D | STP | 3614 KB |
| CAD Portal / CAD Portal | LINK | --- |
Approvals+Certificates: VDM100-150-EIP/G2
| Certificates | File Type | File Size |
|---|---|---|
| Canada USA UL Ordinary Location | LINK | --- |
| EU Pepperl+Fuchs | 503 KB | |
| Worldwide Declaration of Conformity | 50 KB | |
| Declaration of Conformity | ||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | 228 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | 225 KB |
Software: VDM100-150-EIP/G2
| Device Driver | File Type | File Size |
|---|---|---|
| EDS file (Electronic Data Sheet) of the VDM100/G2 Ethernet/IP Interface / EDS-Datei (Elektronisches Datenblatt) der VDM100/G2 Ethernet/IP Schnittstelle | ZIP | 9 KB |
Associated Products: VDM100-150-EIP/G2
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
Discover the SmartRunner laser profile sensors equipped with a unique combination of light section technology and a 2-D vision sensor with integrated LEDs …
The R2000 provides reliable and extremely precise measuring results—with a gapless all-around visibility of 360° ...
Measuring in 3-D or at high speed: The R2300 series offers the right LiDAR sensor for every challenge. Learn more about the advantages, the technology, and the application areas ...
For the first time, a consistent solution range of photoelectric functional principles and innovative technologies is available in identical housings. Users benefit from a uniform operating concept across the entire portfolio. Discover the R100, R101, R103, R200 and R201 series ...
With state-of-the-art technologies, the distance sensors offer the highest levels of precision and reliability ...
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.