Ex pxb motor purge and pressurization control unit 6100-MP-EX-*
- Certified for ATEX and IECEx Zone 1
- Maximum flow rate of 14,000 l/min
- Intrinsically safe user interface for programming and monitoring the system
- Control Unit monitors system operation and controls enclosure power
- Auxiliary contact outputs for alarm or control
- Multiple temperature inputs for monitoring and control
- Automatic pressure compensation for excess leakage from motor
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Download the complete datasheet as a PDF:
Datasheet excerpt: Technical data of 6100-MP-EX-*
| Product Description |
|---|
| 6100 series Ex pxb motor purge and pressurization system control unit |
| General specifications | ||
|---|---|---|
| Operating mode | manual, semi-automatic, or fully automatic - programmable | |
| Series | 6100 Series | |
| Number of volume exchanges | 4 to 19 | |
| Hazardous environment | gas | |
| Supply | ||
| Rated voltage | 100 ... 250 V AC, 48 ... 62 Hz / 0.2 A 20 ... 30 V DC / 0.6 A |
|
| Electrical specifications | ||
| Connection | ||
| Power | Ex e terminal blocks | |
| Connection | 6000-ISB DIN mounted terminal | |
| Input | ||
| Input type | IS 1: Dedicated for 6000-TEMP-01 (optional) IS 2: Dedicated for 6100-MP-LPP Input 1: Dry contact or SRM, Discrete Input, Intrinsically Safe Input 2: Dry contact or SRM, Discrete Input, Intrinsically Safe Input 3: Dedicated for EPV-6100-MP, Flow Signal Input 4: Dedicated high pressure switch, Max Pressure Signal (optional) |
|
| Output | ||
| Output I | AUX 1: Dedicated blower output | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output II | AUX 2 | |
| Output type | Dry contacts, SPDT | |
| Inrush current | 5 A | |
| Contact loading | 2 A at 240 V AC resistive load 2 A at 24 V DC |
|
| Output III | enclosure 1 and 2 | |
| Output type | Dry contacts (2) SPST, NO | |
| Inrush current | 72 A | |
| Contact loading | 8 A at 240 V AC / 120 V AC resistive load 8 A at 24 V DC |
|
| Indicators/settings | ||
| LED indication | Safe pressure: Blue - safe pressure is achieved Enclosure power: Green - power on; Red - power off Rapid exchange: Blue - purging is running System bypass: Yellow - bypass is activated Alarm fault: Red (blinking) - any alarm input detected; Red (solid) - fault |
|
| Pneumatic parameters | ||
| Protective gas supply | regulated and filtered air or inert gas | |
| Pressure requirement | regulated side: 1.4 ... 8.3 bar [20 ... 120 psig) unregulated side: 4.1 ... 8.3 bar [60 ... 120 psig) |
|
| Safe pressure | 0.625 mbar [0.25 in wc / 6.4 mm wc] minimum for 6100-MP-LPP-* | |
| Purge flow and enclosure pressure rate | 2000 l/m ... 14000 l/m see EPV-6100 datasheet for flow rate steps |
|
| Valve flows | pressurization valve: manual gate valve purging valve: pilot drive angle seat valve pilot valve: intrinsically safe solenoid valve |
|
| Directive conformity | ||
| Electromagnetic compatibility | ||
| Directive 2014/30/EU | EN 61326-1:2013 | |
| RoHS | ||
| Directive 2011/65/EU (RoHS) | EN 50581:2012 | |
| Ambient conditions | ||
| Ambient temperature | 0 ... 60 °C (32 ... 140 °F) Standard version -20 ... 60 °C (-4 ... 140 °F) Low temp version, no regulator version |
|
| Storage temperature | 0 ... 80 °C (32 ... 176 °F) Standard version -20 ... 80 °C (-4 ... 176 °F) Low temp version, no regulator version |
|
| Relative humidity | 5 ... 95 %, noncondensing | |
| Vibration resistance | EN 60068-2-6 | |
| Impact resistance | EN 60068-2-27 | |
| Mechanical specifications | ||
| Connection type | Terminals | |
| Core cross section | see manual | |
| Degree of protection | IP66 | |
| Cable entry | 3 x M16 holes, plugs that are included are not hazardous-location rated 4 x M20 holes, plugs that are included are not hazardous-location rated |
|
| Material | inlet and outlet: 1¼ inch NPTF, 316 stainless steel internal piping: copper bulkhead fittings: 316 stainless steel (no regulator model) gate valve: bronze, Grafoil seals purging valve: 316 stainless steel, PTFE seals solenoid valve: brass housing: 316L stainless steel regulator: zinc (standard temp); aluminum (low temp); N/A (no regulator) filter (pneumatic): aluminum tubing (pneumatic): nylon fittings (pneumatic): nickel-plated brass |
|
| Mass | 47.2 kg (104 lb) | |
| Dimensions | 216 mm x 508 mm x 770 mm (8.5 in x 20 in x 30.3 in) | |
| Height | 762 mm | |
| Width | 558 mm | |
| Depth | 213 mm | |
| Data for application in connection with hazardous areas | ||
| Certificate | CML 19 ATEX 1425X | |
| Marking |  II 2G Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| Directive conformity | ||
| Directive 2014/34/EU | EN IEC 60079-0:2018 EN 60079-1:2014 EN 60079-2:2014 EN 60079-7:2015 EN 60079-11:2012 |
|
| International approvals | ||
| IECEx approval | IECEx CML 19.0156X Ex db eb ib [ib Gb][pxb Gb] IIC T4 Gb |
|
| General information | ||
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. Supplemental Standards : EN 61010-1:2010 |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 27180591 |
| ECLASS 12.0 | 27180591 |
| ECLASS 11.0 | 27180591 |
| ECLASS 10.0.1 | 27293101 |
| ECLASS 9.0 | 27293101 |
| ECLASS 8.0 | 27293101 |
| ECLASS 5.1 | 40050501 |
| ETIM 9.0 | EC000243 |
| ETIM 8.0 | EC000243 |
| ETIM 7.0 | EC000243 |
| ETIM 6.0 | EC000243 |
| ETIM 5.0 | EC000243 |
| UNSPSC 12.1 | 39121303 |
Details: 6100-MP-EX-*
Function
The Bebco EPS® 6100 series Ex pxb, Zone 1 motor purge and pressurization system consists of the following components in an IP66 housing: a control unit and user interface, intrinsically safe and power terminals, manual pressurization valve, and electro-pneumatic valve for automatic purging and leakage compensation.
The configurable control unit features temperature and pressure compensation, an extra output for control or alarm, two selectable intrinsically safe inputs for various actions, and up to three temperature sensor inputs that can monitor various points with a motor housing. The intrinsically safe user interface can also be mounted in a separate enclosure near operating personnel for quick access and easy system monitoring. The 6100 purge and pressurization system can also be used to purge and protect large enclosures that require a large flow rate.
Informative Literature: 6100-MP-EX-*
| We are sorry, there are no documents for your language selection. Please select another language. |
Product Documentation: 6100-MP-EX-*
| Product information | Language | File Type | File Size |
|---|---|---|---|
| Basic Explosion Protection Compendium - Type of Protection "Purge and Pressurization" | ENG | 3860 KB | |
| Safety and Security Documentation | |||
| Instruction manual | ENG | 172 KB | |
| Manual | ENG | 6146 KB | |
Approvals: 6100-MP-EX-*
| Certificates | Cert No. | Language | File Type | File Size |
|---|---|---|---|---|
| Europe CML ATEX Certificate II 2 G | CML 19ATEX1425X | ALL | 118 KB | |
| IECEx Certificate of Conformity | IECEx CML 19.0156X | ALL | LINK | --- |
| UK-Type Examination Certificate | CML 21UKEX1380X | ALL | 127 KB | |
| Declaration of Conformity | ||||
| EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F) | DOC-B0D7B | ALL | 163 KB | |
| UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F) | DOC-B0F6 | ALL | 160 KB | |
Associated Products: 6100-MP-EX-*
| Accessories | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
Pepperl+Fuchs (Aust) Pty Ltd
131-149 Link Drive
Campbellfield, Victoria
Melbourne, Victoria 3061
Australia
sales@au.pepperl-fuchs.com
+61 3 9358 3400
Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,300 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.