Serviceline Industrial Sensors
Serviceline Explosion Protection

RFID evaluation unit IC-KP2-2HB18-2V1

IC-KP2-2HB18-2V1
  • LED status indicator of bus communication and read/write heads
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  IC-KP2-2HB18-2V1

Product Description
IDENTControl Compact control interface with CC-Link V2 interface
General specifications
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
UL File NumberE87056
MTBF85 a (Operation at +40 °C)
Indicators/operating means
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2green: read head detected
red: Configuration error
LED PWR/ERRgreen: power on
red: Hardware fault
LED L RUNgreen: on, data communication active
LED L ERRred: on, invalid rotary switch setting or data transfer failure
red: flashing, rotary switch setting changed since last switched on
Rotary switchAddress setting 01 ... 64 (decimal)
Station no.: 0 ... 6 (x10)
Station no.: 0 ... 9 (x1)
Baud rate setting: 0 ... 4
Extended cyclic setting: 0, 1, 2, 4, 8
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 4 A incl. read/write heads
Power consumption3.5 W Without read/write heads
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Interface typeCC-Link
Physical RS-485
ProtocolCC-Link
Transfer rate156; 625 kBit/s
2,5;5;10 Mbit/s
Interface 2
Interface typeDiagnostic Interface
Physical RS 232
ProtocolASCII
Transfer rate38.4 kBit/s
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2
EN 61000-6-4
RoHS
Directive 2011/65/EU (RoHS)IEC/EN 63000
Standard conformity
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protectionIP67
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Diagnostic RS 232: M8 connector
CC-Link: M12 connector, A-coded
Material
Housingpowder coated aluminum
Installationscrew fixing
Massapprox. 300 g
Dimensions
Height42 mm
Width62 mm
Length142 mm

Classifications

SystemClasscode
ECLASS 13.027280401
ECLASS 12.027280401
ECLASS 11.027280401
ECLASS 10.0.127280401
ECLASS 9.027280401
ECLASS 8.027280401
ECLASS 5.127280401
ETIM 9.0EC002998
ETIM 8.0EC002998
ETIM 7.0EC002998
ETIM 6.0EC002998
ETIM 5.0EC002998
UNSPSC 12.143211710

Details: IC-KP2-2HB18-2V1

Function

The RFID identification system IDENTControl Compact from Pepperl+Fuchs offers a vast number of benefits compared to other systems, thanks to its innovative design. The control interfaces IDENTControl and IDENTControl Compact make up the core of the system.

With its integrated interfaces to all commercially available fieldbus systems such as PROFIBUS, PROFINET, Ethernet, EtherCAT, CC-Link, serial connections (RS 232 or RS 485) and numerous connection options for read/write heads available for frequency ranges LF, HF and UHF, the IDENTControl Compact control interface can be easily and flexibly adapted to your requirements.

LEDs on the front of the housing indicate bus communication, connected read/write heads and active read/write commands. Reliability of the application is further increased by using trigger sensors.

The system is equally suited for use in control cabinets and field use in IP67. The interface to the higher-level fieldbus is integrated in the housing, and all connections are designed such that they are pluggable. This enables simple installation and quick, problem-free replacement in case of device failure. The consistent EMC design, with metal housing, grounding and shielded wires, offers a high degree of reliability.

Informative Literature: IC-KP2-2HB18-2V1

Language Selection:
LiteratureLanguageFile TypeFile Size
Application Report - RFID Systems in Industrial Metal StampingENGPDF1773 KB
Application Report - Safe Assignment of Workpiece and ToolENGPDF204 KB

Product Documentation: IC-KP2-2HB18-2V1

Language Selection:
Brief InstructionsLanguageFile TypeFile Size
Brief Instructions - IC-KP2-*ENGPDF2285 KB
Manuals
Manual IC-KP2-2HB18-2V1ENGPDF2388 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB

Design / Simulation: IC-KP2-2HB18-2V1

Language Selection:
CADLanguageFile TypeFile Size
CAD 3-D / CAD 3-DALLSTP1867 KB
CAD Portal / CAD PortalALLLINK---

Approvals: IC-KP2-2HB18-2V1

Language Selection:
CertificatesCert No.LanguageFile TypeFile Size
CLPA CC-LinkRef. No. 760ALLPDF307 KB
Canada, USA ULCoC UL-CA-L87056-31-61115002-0 / UL-US-L87056-11-61115002-0ALLPDF561 KB
Korea Radio ApprovalMSIP-REI-PF1-ICKP22HB182V1ALLPDF360 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0687EALLPDF111 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6844ALLPDF108 KB

Associated Products: IC-KP2-2HB18-2V1

Accessories

Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa

Female connector M12 straight A-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Male connector M12 straight A-coded 4-pin, for cable diameter 5 - 8 mm, shielded, field-attachablefa

Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable grey, shieldedfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa
Mounting aid for DIN railfa
Y connection cable for CC-Linkfa
Adapter cable M8 plug straight A-coded 3-pin to Sub-D-plug straight 9-pin, PUR cable grey, shielded, for PC connection with null modem cablefa
Terminal resistor for CC-Linkfa
Cordset M12 socket straight to M12 plug angled A-coded, 4-pin, PUR cable grey, shieldedfa