Serviceline Industrial Sensors
Tél.: +32 (0)3-644 25 00
Support en ligne pour la protection contre le risque d’explosion

Control interface unit IC-KP2-2HB21-2V1D

IC-KP2-2HB21-2V1D
  • LED status indicator of bus communication and read/write heads
  • Max. 2 read/write heads can be connected
  • Alternatively 1 read/write head and 1 trigger sensor can be connected

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Téléchargez ici la fiche technique complète en PDF:


Caractéristiques techniques  IC-KP2-2HB21-2V1D

Description produit
Control interface unit IDENTControl Compact
with EtherCAT interface
General specifications
Number of read/write headsmax. 2
alternatively 1 read/write head and 1 trigger sensor
UL File NumberE87056
Functional safety related parameters
MTTFd160 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
LEDs 1, 2Status indicator for read/write heads
green: command at read/write head active
yellow: approx. 1 second long, if command was successfully executed
LEDs CH1, CH2green: read head detected
red: Configuration error
LED PWR/ERRgreen: power on
red: Hardware fault
LED RUNOff: init
Flashing (green): pre-operational
Single flash (green): safe-operational
On (green): operational
Electrical specifications
Rated operating voltage20 ... 30 V DC , PELV
Ripple≤ 10 % at 30 V DC
Current consumption≤ 4 A incl. read/write heads
Power consumption3.5 W Without read/write heads
Galvanic isolationbasic insulation acc. to DIN EN 50178, rated insulation voltage of 50 Veff
Interface 1
Interface typeEtherCAT (IN)
Physical Ethernet
ProtocolEtherCAT
Transfer rate100 MBit/s
Interface 2
Interface typeEtherCAT (OUT)
Physical Ethernet
ProtocolEtherCAT
Transfer rate100 MBit/s
Interface 3
Interface typeDiagnostic Interface
Physical RS 232
ProtocolASCII
Transfer rate38.4 kBit/s
Directive conformity
Electromagnetic compatibility
Directive 2014/30/EUEN 61000-6-2:2005, EN 61000-6-4:2007
Standard conformity
Degree of protectionIEC 60529:2001
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Climatic conditionsair humidity max. 96 %
Salt spray resistant to EN 60068-2-52
Shock and impact resistanceOscillation (Sine): 5 g, 10 - 1000 Hz to EN 60068-2-6
Shock (Half-sine): 30 g, 11 ms in accordance with EN 60068-2-27
Mechanical specifications
Degree of protectionIP67
ConnectionRead/write heads: shielded, 4-pin, M12 connector
Power supply: M12 connector
Protective earth: M4 earthing screw
Diagnostic RS 232: M8 connector
EtherCAT: M12 connector, D-coded
Material
Housingpowder coated aluminum
Installationscrew fixing
Massapprox. 300 g

Documents: IC-KP2-2HB21-2V1D

ManualsLangueType de fichierTaille
Manual IC-KP2-2HB21-2V1DENGPDF2033 KB
Manual Read / Write Ranges and Passing Speeds RFIDENGPDF3640 KB
Handbuch IC-KP2-2HB21-2V1DGERPDF1998 KB
Handbuch Schreib- und Leseabstände und Vorbeifahrgeschwindigkeiten RFIDGERPDF3642 KB
Short instructions, safety information
Quick Start Guide IC-KP2-*ENGPDF2285 KB
Kurzanleitung IC-KP2-*GERPDF2341 KB

CAD+CAE: IC-KP2-2HB21-2V1D

CADType de fichierTaille
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS5425 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1833 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: IC-KP2-2HB21-2V1D

Statements of complianceIdentificationType de fichierTaille
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0687CPDF163 KB

Produits associés : IC-KP2-2HB21-2V1D

Accessory of

HF read/write head, ISO 15693, for IDENTControlfa

HF read/write head, ISO 15693, for IDENTControlfa

HF read/write head, ISO 15693, for IDENTControlfa

Read/Write head for IDENTControl, 125 kHz, thread M30 x 1.5fa

Read/Write head for IDENTControl, 125 kHz, VariKont housingfa

Read/Write head for IDENTControl, 125 kHz, thread M18 x 1fa

Read/Write head for IDENTControl, 125 kHz, flat housingfa

Read/Write head for IDENTControl, 125 kHz, square housingfa
UHF read/write head for hazardous areas, for IDENTControl, Canada, USA, and Mexicofa
UHF read/write head for IDENTControl, Europefa
UHF read/write head for IDENTControl, Indiafa
UHF read/write head for IDENTControl, Singapore and Vietnamfa
UHF read/write head for IDENTControl, Russiafa
UHF read/write head for IDENTControl, Moroccofa
Read/write head for IDENTControl, USA, Canada, Mexico, and Argentinafa
UHF read/write head for IDENTControl, Chinafa
UHF read/write head for IDENTControl, Brazilfa
UHF read/write head for IDENTControl, Japanfa
UHF read/write head for IDENTControl, Australiafa
UHF read/write head for IDENTControl, Thailand and Hong Kongfa
UHF read/write head for IDENTControl, Malaysiafa
UHF read/write head for IDENTControl, Singapore and Vietnamfa
HF read/write head, ISO 15693, for IDENTControlfa
HF read/write head, ISO 15693, for IDENTControlfa
HF read/write head, ISO 15693, for IDENTControlfa
Read/Write head for IDENTControl, 125 kHz, square housingfa
LF read/write head for IDENTControlfa
LF read/write head for IDENTControlfa
Accessories

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Connecting cable, M12 to M12, PUR cable 4-pin, shieldedfa

Female connector, M12, 4-pin, screened, field attachablefa

4-pin, M12, screened cable connector, field attachablefa
Mounting aid for DIN railfa
Adapter M8 on Sub-D for PC connection with null modem cablefa
Visitez le Hub RFID

Visitez notre « Hub RFID » : ce site Internet spécial constitue une base de connaissances du RFID. Obtenez des réponses aux questions fréquemment posées et apprenez les applications RFID types…