Infrastructure de bus de terrain et Ethernet-APL FieldConnex

Non disponible à la vente

High-Density Fieldbus Power Hub, Motherboard for Honeywell C-Series MB-FB-4R.HO.SC

4 segments, redundant, individual modules per segment
Customized for Honeywell, C-Series
High-power trunk: Live work on devices in any hazardous area
Optimized for size and quality, low heat dissipation
For FOUNDATION Fieldbus H1
Optional advanced diagnostics
Passive impedance and CREST technology for high reliability
Installation in Zone 2/Div. 2

Technical Data
Informative Literature
Product Documentation
Design / Simulation
Approvals
Produits associés
Vous sollicitez un expert

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Téléchargez ici la fiche technique complète en PDF:

Caractéristiques techniques MB-FB-4R.HO.SC

General specifications
Design / Mounting		Motherboard based
Supply
Connection		Channel or external supply
Rated voltage		19.2 ... 35 V SELV/PELV
Rated current		6.3 A
Power dissipation		typ. 0.2 W per segment
Fieldbus connection
Number of segments
	Redundant	4
Host-side		Honeywell Series C 300 System Connector
Terminating resistor		integrated 100 Ω
Indicators/operating means
Fault signal		to Honeywell C 300 System
Galvanic isolation
Fieldbus segment/Fieldbus segment		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Fieldbus segment/Supply		functional insulation acc. to DIN EN 50178, rated insulation voltage 50 V_eff
Directive conformity
Electromagnetic compatibility
	Directive 2004/108/EC	EN 61326-1:2006
Standard conformity
Electromagnetic compatibility		NE 21:2006
Degree of protection		IEC 60529
Fieldbus standard		IEC 61158-2
Shock resistance		EN 60068-2-27
Vibration resistance		EN 60068-2-6
Ambient conditions
Ambient temperature		-40 ... 60 °C (-40 ... 140 °F)
Storage temperature		-40 ... 85 °C (-40 ... 185 °F)
Relative humidity		< 95 % non-condensing
Shock resistance		15 g , 11 ms
Vibration resistance		1 g , 10 ... 150 Hz
Mechanical specifications
Connection type		Honeywell channel or plug with screw flange
Core cross section		2.5 mm² if supplied via plug with screw flange
Degree of protection		IP00
Mass		approx. 720 g
Dimensions
	Height	146 mm
	Width	150 mm
	Depth	75 mm
Mounting		Honeywell channel
International approvals
FM approval
	FM certificate	FM 19 US 0015 X and FM 19 CA 0011 X
	FM marking	AEx/Ex ec IIC T4
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27242603
ECLASS 12.0	27242603
ECLASS 11.0	27242603
ECLASS 10.0.1	27242603
ECLASS 9.0	27242603
ECLASS 8.0	27242603
ECLASS 5.1	27242603
ETIM 9.0	EC001598
ETIM 8.0	EC001598
ETIM 7.0	EC001598
ETIM 6.0	EC001598
ETIM 5.0	EC001604
UNSPSC 12.1	39121008

Details: MB-FB-4R.HO.SC

Informative Literature: MB-FB-4R.HO.SC

Literature	Langue	Type de fichier	Taille
Application Report - Controlling and Monitoring liquid Helium at the Deutsches Elektronen-Synchrotron	ENG	PDF	361 KB
Application Report - Digital Communication in Steel-Plate Manufacturing	ENG	PDF	470 KB

Product Documentation: MB-FB-4R.HO.SC

System Descriptions	Langue	Type de fichier	Taille
Conformity matrix for R2-SP-IC* and F2-SP-IC* with motherboards: MB-, MBHD, FBTA-228-BPFB-8, FBTA-228-BPFB-R-4R and power supply modules: HD2-FBPS-*	ENG	PDF	73 KB
Manuals
Manual Fieldbus Power Hub for Honeywell	ENG	PDF	1025 KB

Design / Simulation: MB-FB-4R.HO.SC

CAD	Langue	Type de fichier	Taille
DXF Drawings Power Hub MB-FB-4R.HO.SC, Subject to change without notice / DXF Zeichnungen Power Hub MB-FB-4R.HO.SC, Änderungen vorbehalten	ALL	ZIP	798 KB

Approvals: MB-FB-4R.HO.SC

Certificates	Identification	Langue	Type de fichier	Taille
Canada FM	FM 19 CA 0011X	ALL	PDF	356 KB
USA FM	FM 19 US 0015X	ALL	PDF	213 KB

Produits associés : MB-FB-4R.HO.SC

Matching System Components

	HD2-DM-A Fieldbus Power Hub, Advanced Diagnostic Module
	Comprehensive diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Precise measurements through passive circuits, For commissioning, online monitoring and troubleshooting, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunkpa

	HD2-DM-B Fieldbus Power Hub, Basic Diagnostic Module
	Basic monitoring for power supply output and health, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-FBPS-1.23.500 Fieldbus Power Hub, Power Supply Module
	Output: 21 ... 23 V/500 mA, Voltage limitation for Entity ic and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.17.500 Fieldbus Power Hub, Power Supply Module
	Output: 15 ... 17 V/500 mA, Voltage limitation for FISCO ic, Entity ic, also FNICO and Ex nL, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: Zone 2 - high-power trunk, Instrument location / spur protection: Zone 2 - all relevant types of protection, Function: Fieldbus power supply, Design / Mounting: Motherboard basedpa

	HD2-FBPS-1.25.360 Fieldbus Power Hub, Power Supply Module
	2-channel power supply system, modular, motherboard-based with transparent coupling between PROFIBUS DP and PA. motherboard and modules, 2 segments, simplex, individual modules per segment, Couples PROFIBUS PA devices transparently to PROFIBUS DP, High-power trunk: Live work on devices in any hazardous area, Transparent, configuration free, Optimized for size and quality, low heat dissipation, IECEx approval, International, Europe, USA, Canadapa

	HD2-FBPS-1.500 Fieldbus Power Hub, Power Supply Module
	Output: 28 ... 30 V/500 mA, High-power trunk for high device count and long cable lengths, With galvanic isolation, Installation in Zone 2/Class I, Div. 2, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

	HD2-DM-A.RO Fieldbus Power Hub, Advanced Diagnostic Module with Relay Output
	Diagnostics for fieldbus physical layer and power supply, Plug-in Module for the FieldConnex Power Hub, Plug and play - no engineering required, For online monitoring, For FOUNDATION Fieldbus H1 and PROFIBUS PA, IECEx approval, International, Europe, USA, Canada, Device coupler location: non-explosion hazardous area Zone 2 - high-power trunk Zone 1 - high-power trunk Division 2 - high-power trunk Division 1 - high-power trunk, Device coupler location [2]: Zone 2 - high-power trunkpa

Remarques générales sur les informations produit de Pepperl+Fuchs

Accès direct

Applications IIoT industriel dans les industries des procédés

Ethernet-APL offre une communication continue à tous les niveaux hiérarchiques. En savoir plus sur la technologie pionnière …

Mises à jour RSS Info Service pour PANOS

Soyez informé dès qu'une nouvelle mise à jour logicielle de PANOS, le système d'exploitation des commutateurs Ethernet-APL, est disponible : Grâce à notre flux RSS vous serez immédiatement informé par e-mail de la publication d'une mise à jour.

FieldConnex® : le bus de terrain en toute simplicité

De la prise de décisions à la planification, en passant par l'installation et la mise en service, sans oublier l'exploitation et la maintenance : Découvrez comment tirer le meilleur parti de votre infrastructure de bus de terrain…

Produits

Bus de terrain pour zone non dangereuse ou pour toute zone à risque d'explosion

Pepperl+Fuchs S.A.
Metropoolstraat 11
2900 Schoten / Anvers
Belgique
TVA BE 0436.097.152, RPM Anvers, dép.Anvers
sales@be.pepperl-fuchs.com
phone +32 3 644 25 00

Pepperl+Fuchs est leader comme concepteur et fabricant de capteurs et composants électroniques pour le marché mondial de l'automatisation. L'innovation constante, la qualité incontestable et la croissance soutenue, garantissent notre succès, depuis plus de 70 ans. Pepperl+Fuchs emploie 6300 personnes dans le monde et compte des usines en Allemagne, aux USA, à Singapour, en Hongrie, en Indonésie et au Vietnam ; la plupart d'entre elles sont certifiées ISO 9001.