Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Téléchargez ici la fiche technique complète en PDF:
Description produit |
---|
Vision sensor for complex object recognition with 6 feature checks and 16 job storage memory locations |
General specifications | ||
---|---|---|
Object distance | 20 ... 500 mm , nominal 100 mm |
|
Light source | Integrated LED lightning or External lighting | |
Light type | White light | |
Picture detail | 8 mm x 6 mm ... 135 mm x 100 mm , dependant of operating distance 30 mm x 22 mm At 100 mm operating distance |
|
Trigger mode | Free-running or triggered externally | |
Depth of focus | ± 5 % of the operating distance | |
Resolution | 640 x 480 pixels | |
Capture range | adjustable | |
Parameterization/software | ||
Parameter assignment | Parameterization via PC user interface VOS3-Config | |
Evaluations per picture | ||
Position detection | can be activated/deactivated | |
Feature detection | 1 ... 6 | |
Location tracing | Location tracing with result from position detection | |
Evaluation procedure | ||
Position detection | Focal point Touch Pattern Correlation |
|
Feature check | Grey scale value Gradient Contrast Pattern Contour |
|
Indicators/operating means | ||
Operation indicator | LED green | |
Function indicator | LED red: fault signal , LED yellow: switching state (2x) : Position OK/features OK |
|
Focus setting | Focus adjustable via set screw | |
Electrical specifications | ||
Operating voltage | 24 V DC ± 20 % | |
Ripple | 5 Vss | |
Operating current | 200 mA without load | |
Protection class | 2 | |
Interface | ||
Interface type | Ethernet 100 Mbit/s , RS 422 | |
Input | ||
Input voltage | 24 V | |
Control input | External triggering | |
Switching threshold | high: ≥ 10 V, low: ≤ 3 V , trigger on the ascending edge | |
Output | ||
Switching type | PNP, NO optically decoupled , short-circuit/overload protected | |
Switching voltage | 24 V | |
Switching current | max. 200 mA each output | |
Pulse extension | adjustable | |
Output 1 | ||
Output type | Connection to external lighting | |
Output 2 | ||
Output type | Ready for operation | |
Output 3 | ||
Output type | All features within tolerance | |
Output 4 | ||
Output type | Position detected/within tolerance | |
Compliance with standards and directives | ||
Directive conformity | ||
EMC Directive 2004/108/EC | EN 60947-5-2 | |
Standard conformity | ||
Electromagnetic compatibility | EN 61000-4-2/3/4/6 | |
Mech. capacity | EN 60068-2-6 , EN 60068-2-27 | |
Shock and impact resistance | EN 60947-5-2 | |
Approvals and certificates | ||
Approvals | CE, cULus | |
Ambient conditions | ||
Ambient temperature | 0 ... 50 °C (32 ... 122 °F) | |
Storage temperature | -20 ... 60 °C (-4 ... 140 °F) | |
Shock resistance | < 50 g | |
Mechanical specifications | ||
Housing depth | ||
Housing diameter | ||
Degree of protection | IP67 | |
Connection | M12 connector, 5 pin ; 2 x M12 connector, 8-pin | |
Material | ||
Housing | anodized aluminum , plastic | |
Optical face | Plastic pane | |
Installation | with dove tail mounting clamp | |
Mass | approx. 170 g | |
Dimensions | ||
Height | 30.5 mm | |
Width | 30.5 mm | |
Length | 64 mm |
System | Classcode |
---|---|
ECLASS 13.0 | 27310101 |
ECLASS 12.0 | 27310101 |
ECLASS 11.0 | 27310101 |
ECLASS 10.0.1 | 27310101 |
ECLASS 9.0 | 27310101 |
ECLASS 8.0 | 27310101 |
ECLASS 5.1 | 27310101 |
ETIM 9.0 | EC002999 |
ETIM 8.0 | EC002999 |
ETIM 7.0 | EC002999 |
ETIM 6.0 | EC002999 |
ETIM 5.0 | EC002999 |
UNSPSC 12.1 | 43211711 |
Le VOS312 est un capteur Vision librement configurable pour les tâches de reconnaissance, comme par ex. le contrôle de présence, d’intégrité et de position. Les tâches de reconnaissance peuvent être réalisées via 5 méthodes d’analyse. Le capteur peut être configuré à l’aide de l’interface PC intuitive VOS3-Config, puis être utilisé sans PC.
En outre, le VOS312 peut aussi enregistrer jusqu’à 16 tâches dans le capteur. Les tâches peuvent être gérées ou activées à l’aide de la gestion des tâches et de la commande par télégramme. D’autre part, le capteur offre la possibilité de lier jusqu’à 6 vérifications caractéristiques.
Manuals | Langue | Type de fichier | Taille |
---|---|---|---|
Manual VOS302/VOS312 | ENG | 6109 KB |
CAD | Langue | Type de fichier | Taille |
---|---|---|---|
CAD 3-D / CAD 3-D | ALL | STP | 1883 KB |
Software Tools | Parution | Type de fichier | Taille |
---|---|---|---|
VOS3-Config GER/ENG / VOS3-Config GER/ENG | ZIP | 12213 KB |