Atendimento ao Cliente da Divisão de Sensores Industriais
Rede de Atendimento - Divisão de Proteção Contra Explosão
Indisponível para Compra
Indisponível para Compra

Current Driver/Repeater HiD2035

HiD2035
  • 1-channel isolated barrier
  • 24 V DC supply (loop powered)
  • Current input/output 1.5 mA ... 50 mA
  • Fire detector or I/P supply
  • Accuracy 0.1 %

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:


Folhas de dados: Dados técnicos do  HiD2035

General specifications
Signal typeAnalog input/analog output
Supply
Connectionvia input terminals
Rated voltage6 ... 30 V DC loop powered , reverse polarity protected
Power dissipation0.7 W at 40 mA , 24 V
Control circuit
ConnectionSL1: 8a(+), 7a(-)
Current consumption< 0.6 mA at 24 V and open circuit
Current1.5 ... 50 mA , loop powered
Signal levelvoltage drop 9.6 V at 20 mA and 500 Ω load (4 V at 4 mA)
Field circuit
ConnectionSL2: 5a(+), 5b(-)
Characteristicsfor fire and smoke detectors
Uout = (Uin - 1.6) - (0.4 x Iout) 6 V < Uin < 25 V
Uout = (25 - 1.6) - (0.4 x Iout) 25 V < Uin < 30 V
Load0 ... 750 Ω for I/P applications
Signal1.5 ... 50 mA for fire and smoke detectors
4 ... 20 mA on a load of max. 750 Ω for I/P applications
Ripplemax. 150 µA peak to peak for I/P applications
Response time50 ms , 10 ... 90 % step change for I/P applications
Transfer characteristics
Accuracy< ± 0.1 % of full-scale value (range 4 ... 20 mA)
Influence of temperature< ± 0.01 %/K
Repeat accuracy< ± 300 µA, 6 V < Uin < 25 V/1.5 mA < Iout < 50 mA
Influence of load< ± 0.3 % of full-scale value from 0 ... 750 Ω
Linearity< ± 0.1 % of full-scale value (range 4 ... 20 mA)
Indicators/settings
Labelingspace for labeling at the front
Directive conformity
Electromagnetic compatibility
Directive 2004/108/ECEN 61326-1:2006
Conformity
Electromagnetic compatibilityNE 21:2006
For further information see system description.
Degree of protectionIEC 60529
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Relative humidity5 ... 90 %, non-condensing up to 35 °C (95 °F)
Mechanical specifications
Degree of protectionIP20
Massapprox. 140 g
Dimensions18 x 106 x 128 mm (0.7 x 4.2 x 5 inch)
Height106 mm
Width18 mm
Length128 mm
Mountingon termination board
Codingpin 1 and 3 trimmed
For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificateCESI 02 ATEX 086
MarkingEx-Hexagon II (1)G [Ex ia Ga] IIC , Ex-Hexagon II (1)D [Ex ia Da] IIIC
OutputEx ia, Ex iaD
Voltage26 V
Current93 mA
Power605 mW
Supply
Maximum safe voltage250 V AC (Attention! Um is no rated voltage.)
CertificatePF 11 CERT 2109 X
MarkingEx-Hexagon II 3G Ex nA IIC T4 Gc [device in zone 2]
Galvanic isolation
Input/Outputsafe electrical isolation acc. to EN 60079-11: 2007, voltage peak value 375 V
Directive conformity
Directive 94/9/ECEN 60079-0:2009, EN 60079-11:2007, EN60079-15:2005 , EN 60079-26:2007 , EN 61241-11:2006
International approvals
CSA approval
Control drawing366-005CS-12B (cCSAus)
IECEx approvalIECEx TUN 04.0012
Approved for[Ex ia] IIC
General information
Supplementary informationObserve the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

SystemClasscode
ECLASS 13.027210120
ECLASS 12.027210120
ECLASS 11.027210120
ECLASS 10.0.127210120
ECLASS 9.027210120
ECLASS 8.027210120
ECLASS 5.127210120
ETIM 9.0EC002653
ETIM 8.0EC002653
ETIM 7.0EC002653
ETIM 6.0EC002653
ETIM 5.0EC001485
UNSPSC 12.132101514

Details: HiD2035

Product Documentation: HiD2035

Selecione o Idioma:
Safety and Security DocumentationIdiomaTipo de ArquivoTamanho do Arquivo
Manual de instruçõesPORPDF164 KB
ManualENGPDF408 KB
Manuals
System ManualENGPDF5438 KB

Design / Simulation: HiD2035

Selecione o Idioma:
CADIdiomaTipo de ArquivoTamanho do Arquivo
CAD 2-D / CAD 2-DALLZIP16364 KB
CAE
EPLAN macros H-System devices (EMA) / EPLAN-Makros Geräte H-System (EMA)ALLZIP3536 KB

Approvals: HiD2035

Selecione o Idioma:
CertificatesNúmero do CertificadoIdiomaTipo de ArquivoTamanho do Arquivo
Canada, USA CSACoC 70001345ALLPDF136 KB
Europe CESI ATEX Category (1) D ATEX Category (1) GCESI 02 ATEX 086ALLPDF3887 KB
Europe Pepperl+Fuchs ATEX Category 3 GPF 11 CERT 2109 XALLPDF446 KB
TUV Nord IECEx Certificate of ConformityIECEx TUN 04.0012ALLLINK---
Worldwide Pepperl+Fuchs Functional Safety AssessmentFS-0093PF-20ALLPDF403 KB
Control Drawings
Control drawing CSA / Control drawing CSA   ALLPDF98 KB
Safety Products Selector

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.