Voltage Repeater HiC2068

1-channel isolated barrier
24 V DC supply (bus powered)
Voltage input 0 mV ... ± 500 mV
Voltage output 0 mV ... ± 500 mV
Selectable up/downscale sensor breakage detection
Fault output signal

Folha de Dados
Product Documentation
Design / Simulation
Approvals

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Faça o download das folhas de dados em PDF:

Folhas de dados: Dados técnicos do HiC2068

General specifications
Signal type		Analog input
Supply
Connection		SL1: 1a(-), 1b(-); 2a(+), 2b(+)
Rated voltage		20 ... 30 V DC bus powered via Termination Board
Ripple		within the supply tolerance
Rated current		≤ 22 mA
Power dissipation/power consumption		0.7 W max.
Lockout voltage		> 11 V DC
Input
Connection side		field side
Connection		SL2: 5a(+), 5b(-)
Input resistance		≥ 1.4 MΩ
Transmission range		0 ... ± 500 mV
Offset voltage/current		≤ 5 µV / ≤ 5 nA
Output
Connection side		control side
Connection		SL1: 8a(+), 7a(-)
Voltage		0 ... ± 500 mV
Load		Accuracy figures for infinite load impedance. Additional 0.03 % of span for a load resistance of 10 kΩ
Output resistance		max. 3 Ω
Line fault detection		input: ± 700 mV output: ± 1 V
Fault indication output
Connection		SL1: 6b
Output type		open collector transistor (internal fault bus)
Fault voltage		< V_cc/2 (when connected to V_cc via 10 kΩ pull up resistor)
Transfer characteristics
Deviation
	After calibration	at 20 °C (68 °F): ± 30 µV up to ± 100mV/± 0.03 % of the span up to +500 mV/± 0.03 % of the span up to -500 mV
	Influence of ambient temperature	± 10 µV/K (typical ± 2.5 µV/K)
Absolute		< 0.25 K at 30 V voltage supply
Bandwidth		DC to > 350 Hz (-3 dB)
Settling time		< 1 ms
Rise time/fall time		< 100 µs
Galvanic isolation
Output/power supply		functional insulation, rated insulation voltage 50 V AC
Indicators/settings
Display elements		LEDs
Control elements		DIP switch
Configuration		via DIP switches
Labeling		space for labeling at the front
Directive conformity
Electromagnetic compatibility
	Directive 2014/30/EU	EN 61326-1:2013 (industrial locations)
Conformity
Electromagnetic compatibility		NE 21:2006 For further information see system description.
Degree of protection		IEC 60529:2001
Protection against electrical shock		UL 61010-1
Ambient conditions
Ambient temperature		-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protection		IP20
Mass		approx. 100 g
Dimensions		12.5 x 106 x 128 mm (0.5 x 4.2 x 5.1 inch) (W x H x D)
	Height	106 mm
	Width	12.5 mm
	Depth	128 mm
Mounting		on termination board
Coding		pin 2, 3 and 4 trimmed For further information see system description.
Data for application in connection with hazardous areas
EU-type examination certificate		BASEEFA 10 ATEX 0031X
	Marking	II (1)GD, I (M1), [Ex ia] IIC, [Ex iaD], [Ex ia] I (-20 °C ≤ T_amb ≤ 60 °C) [circuit(s) in zone 0/1/2]
	Voltage	5.5 V DC
	Current	2.4 mA
	Power	3.3 mW
Supply
	Maximum safe voltage	253 V (Attention! The rated voltage can be lower.)
Certificate		BASEEFA 10 ATEX 0032X
	Marking	II 3G Ex nA II T4
Galvanic isolation
	Input/Output	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
	Input/power supply	safe electrical isolation acc. to IEC/EN 60079-11, voltage peak value 375 V
Directive conformity
	Directive 2014/34/EU	EN 60079-0:2012+A11:2013 , EN 60079-11:2012 , EN 60079-15:2010
International approvals
UL approval
	Control drawing	116-0317 (cULus)
IECEx approval
	IECEx certificate	IECEx BAS 10.0012X IECEx BAS 10.0013X
	IECEx marking	[Zone 0] [Ex ia] IIC, [Ex iaD], [Ex ia] I Ex nA II T4
General information
Supplementary information		Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com.

Classifications

System	Classcode
ECLASS 13.0	27210125
ECLASS 12.0	27210120
ECLASS 11.0	27210120
ECLASS 10.0.1	27210120
ECLASS 9.0	27210120
ECLASS 8.0	27210120
ECLASS 5.1	27210120
ETIM 9.0	EC002653
ETIM 8.0	EC002653
ETIM 7.0	EC002653
ETIM 6.0	EC002653
ETIM 5.0	EC001485
UNSPSC 12.1	32101514

Details: HiC2068

Product Documentation: HiC2068

Safety and Security Documentation	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Manual de instruções	POR	PDF	164 KB
Manuals
System Manual	ENG	PDF	5438 KB

Design / Simulation: HiC2068

CAD	Idioma	Tipo de Arquivo	Tamanho do Arquivo
CAD 3-D / CAD 3-D	ALL	STP	2770 KB
CAD Portal / CAD Portal	ALL	LINK	---

Approvals: HiC2068

Certificates	Número do Certificado	Idioma	Tipo de Arquivo	Tamanho do Arquivo
Baseefa IECEx Certificate of Conformity	IECEx BAS 10.0012X	ALL	LINK	---
Baseefa Type n IECEx Certificate of Conformity	IECEx BAS 10.0013X	ALL	LINK	---
Canada UL cUL	E106378 cUL (QUZW7)	ALL	LINK	---
Canada UL cUL	E106378 cUL (QVAJ7)	ALL	LINK	---
Europe Baseefa ATEX Category (1) GD	Baseefa 10 ATEX 0031X	ALL	PDF	495 KB
Europe Baseefa II 3 G ATEX Category 3 G	Baseefa 10 ATEX 0032X	ALL	PDF	452 KB
USA UL	E106378 UL (QVAJ)	ALL	LINK	---
USA UL	E106378 UL (QUZW)	ALL	LINK	---
Control Drawings
Control drawing UL / Control drawing UL		ALL	PDF	69 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)	DOC-0778D	ALL	PDF	83 KB

Notas Gerais sobre as informações de produto da Pepperl+Fuchs

Acesso Rápido

Selector for Safety Products

Choose from various selection criteria like safety integrity level, performance level, device function, and signal type and find the SIL/PL assessed device that you are looking for.

Pepperl+Fuchs Ltda.
Rua José Versolato, 111
Domo Corporate Tower, Conjunto 144
09750-730 São Bernardo do Campo, SP
Brasil
vendas@br.pepperl-fuchs.com
phone +55 11 4007 1448

A Pepperl+Fuchs é líder na fabricação e no desenvolvimento de sensores e componentes eletrônicos para o setor global da automação industrial. Inovação contínua, qualidade e crescimento constante garantem o nosso sucesso há mais de 70 anos. Empregamos mais de 6.300 colaboradores em todo o mundo e contamos com fábricas próprias na Alemanha, Estados Unidos, Cingapura, Hungria, Indonésia e Vietnã, todas com certificação ISO 9001.