In order to give you a better service Pepperl+Fuchs uses cookies. By continuing to browse the site you are agreeing to our

 use of cookies. I agree.
Serviceline Industrial Sensors
Phone: 330-486-0001
Fax: 330-405-4710
Ask an Expert
Serviceline Explosion Protection
Phone: 330-486-0002
Fax: 330-963-5827
Ask an Expert
Industrial Sensors

Ultrasonic direct detection sensor UB100-F77-E0-V31

UB100-F77-E0-V31
  • Miniature design
  • Program input
  • Degree of protection IP67
  • Switching status indicator, yellow LED

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Download the complete datasheet as a PDF:


Datasheet excerpt: Technical data of  UB100-F77-E0-V31

Product Description
Ultrasonic direct detection sensor
General specifications
Sensing range10 ... 100 mm
Adjustment range30 ... 100 mm
Dead band0 ... 10 mm
Standard target plate20 mm x 20 mm
Transducer frequencyapprox. 400 kHz
Nominal ratings
Time delay before availability≤ 150 ms
Limit data
Permissible cable lengthmax. 300 m
Indicators/operating means
LED yellowswitching state and flashing: Teach-In
Electrical specifications
Rated operating voltage24 V DC
Operating voltage20 ... 30 V DC , ripple 10 %SS ; 12 ... 20 V DC sensitivity reduced to 90 %
No-load supply current≤ 20 mA
Input
Input type1 program input
Levellow level : 0 ... 0.7 V (Teach-In active)
high level : UB or open input (Teach-In inactive)
Input impedance16 kΩ
Pulse length≥ 3 s
Output
Output type1 switch output E0, NPN, NO
Rated operating current200 mA , short-circuit/overload protected
Voltage drop≤ 2 V
Switch-on delay≤ 50 ms
Repeat accuracy± 1 mm
Switching frequency  10 Hz
Range hysteresistyp. 2.5 mm
Off-state current≤ 0.01 mA
Temperature influence+ 0.17 %/K
Compliance with standards and directives
Standard conformity
StandardsEN 60947-5-2:2007+A1:2012
IEC 60947-5-2:2007 + A1:2012
Approvals and certificates
UL approvalcULus Listed, General Purpose
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Shock resistance30 g , 11 ms period
Vibration resistance10 ... 55 Hz , Amplitude ± 1 mm
Mechanical specifications
Connection typeM8 x 1 connector , 4-pin
Degree of protectionIP67
Material
HousingPolycarbonate
Transducerepoxy resin/hollow glass sphere mixture; polyurethane foam
Installation positionany position
Mass10 g
Tightening torque, fastening screwsmax. 0.2 Nm

Approvals+Certificates: UB100-F77-E0-V31

Statements of complianceCertificate No.File TypeFile Size
EU-Declaration of conformity / EU-KonformitätserklärungDOC-2942APDF239 KB
Certificates
Canada USA UL Ordinary Location20190724-E87056PDF402 KB

Associated Products: UB100-F77-E0-V31

Accessories

Female cordset, M8, 4-pin, PVC cablefa

Female cordset, M8, 4-pin, PVC cablefa
Programming unit for ultrasonic sensors with Teach-in input at pin 2fa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
General Notes Relating to Pepperl+Fuchs Product Information
Quick Links
SmartBridge® – The Evolution towards Sensors 4.0

Pepperl+Fuchs Inc.
1600 Enterprise Parkway
Twinsburg, OH 44087
USA
- responsible for Canada -
sales@us.pepperl-fuchs.com
phone +1 330 425-3555

© 2019 All Rights Reserved.

Pepperl+Fuchs is a leading developer and manufacturer of electronic sensors and components for the global automation market. Continuous innovation, enduring quality, and steady growth have been the foundation of our success for more than 70 years. Pepperl+Fuchs employs 6,200 people worldwide and has manufacturing facilities in Germany, USA, Singapore, Hungary, Indonesia and Vietnam, most of them ISO 9001 certified.