Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Nedostupné pro prodej

Retroreflective sensor MLV12-54-LAS-300/76b/95/110

MLV12-54-LAS-300/76b/95/110
  • Series of sensors in a widely used standard housing
  • Visible red light, pulsed LASER light
  • Precision: high degree of repeatability thanks to small light spot
  • Reliable detection of minimum target sizes > 0.3 mm
  • Resistant against noise: reliable operation under all conditions
  • High level of stability thanks to the metal housing frame

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   MLV12-54-LAS-300/76b/95/110

Popis produktu
Laser retroreflective sensor for the detection of small parts, small design, polarization filter, 450 mm detection range, laser red light, light/dark on, push-pull output, test input, M8 plug
General specifications
Effective detection range100 ... 450 mm
Reflector distance0.02 ... 4 m
Threshold detection range5.6 m
Reference targetMH82 reflector
Light sourcelaser diode
Light typemodulated visible red light
Polarization filteryes
Laser nominal ratings
NoteLASER LIGHT , DO NOT STARE INTO BEAM
Laser class1
Wave length650 nm
Beam divergence2 mrad
Pulse length1.8 µs
Repetition rate17.86 kHz
max. pulse energy1.1 nJ
Target size> 0.3 mm
Diameter of the light spotapprox. 0.5 mm at detection range 150 mm up to 400 mm
Opening angle0.1 °
Ambient light limit
Continuous light50000 Lux
Modulated light5000 Lux
Functional safety related parameters
MTTFd930 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)90 %
Indicators/operating means
Operation indicatorLED green, flashes in case of short-circuit
Function indicator2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Control elementsrotary switch for light/dark, sensitivity adjuster
Electrical specifications
Operating voltage10 ... 30 V DC
Ripplemax. 10 %
No-load supply currentmax. 40 mA
Input
Test inputemitter deactivation at 0 V
Output
Switching typelight/dark on switchable
Signal output1 push-pull (4 in 1) output, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 0.1 A
Voltage drop≤ 2.5 V DC
Switching frequency2500 Hz
Response time0.2 ms
Conformity
Product standardEN 60947-5-2
Laser safetyIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Compliance with standards and directives
Standard conformity
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Laser classIEC 60825-1:2007 Complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007
Approvals and certificates
EAC conformityTR CU 020/2011
UL approvalcULus Listed, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-10 ... 50 °C (14 ... 122 °F)
Storage temperature-20 ... 65 °C (-4 ... 149 °F)
Mechanical specifications
Degree of protectionIP67
Connection4-pin M8 metal connector, 90° rotatable
Material
HousingFrame: nickel plated, die cast zinc,
Laterals: glass-fiber reinforced plastic PC
Optical facePlastic pane
Mass60 g
Dimensions
Height49 mm
Width41.5 mm
Depth15 mm

Classifications

SystemClasscode
ECLASS 13.027270902
ECLASS 12.027270902
ECLASS 11.027270902
ECLASS 10.0.127270902
ECLASS 9.027270902
ECLASS 8.027270902
ECLASS 5.127270902
ETIM 9.0EC002717
ETIM 8.0EC002717
ETIM 7.0EC002717
ETIM 6.0EC002717
ETIM 5.0EC002717
UNSPSC 12.139121528

Details: MLV12-54-LAS-300/76b/95/110

Product Documentation: MLV12-54-LAS-300/76b/95/110

Výběr jazyka:
Brief InstructionsJazykTyp souboruVelikost souboru
Instruction leaflet / BeipackzettelALLPDF660 KB

Design / Simulation: MLV12-54-LAS-300/76b/95/110

Výběr jazyka:
CADJazykTyp souboruVelikost souboru
CAD 3-D / CAD 3-DALLSTP200 KB
CAD Portal / CAD PortalALLLINK---

Approvals: MLV12-54-LAS-300/76b/95/110

Výběr jazyka:
CertificatesČíslo certifikátuJazykTyp souboruVelikost souboru
Canada USA UL Ordinary LocationE87056ALLLINK---
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-0916CALLPDF308 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5355ALLPDF298 KB

Související produkty: MLV12-54-LAS-300/76b/95/110

Accessories
Mounting bracket for series MLV12 sensorsfa
Mounting bracket for series MLV12 sensorsfa
dove tail mounting clampfa
dove tail mounting clampfa
dove tail mounting clampfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Reflector with Micro-structure, rectangular 82 mm x 60 mm, mounting holesfa
Reflector with Micro-structure, hexagonal 78 mm x 61 mm, mounting holesfa
Reflector with Micro-structure, rectangular 32 mm x 20 mm, mounting holesfa
Reflector with Micro-structure, round ø 20.6 mm, self-adhesivefa
Reflective tape A4 (297 mm x 210 mm)fa
Reflective tape, cut to sizefa
Fotoelektrické senzory řad R10x a R20x

Poprvé je k dispozici ucelená řada řešení využívajících fotoelektrické funkční principy a inovativní technologie ve shodných pouzdrech. Uživatelé mohou těžit z jednotné provozní koncepce napříč celým portfoliem. Seznamte se s řadami R100, R101, R103, R200 a R201…

Fotoelektrický senzor ML100

Ať už jde o skleněné solární destičky, nebo desky s plošnými spoji: Fotoelektrické senzory řady ML100 jsou přesně přizpůsobeny požadavkům různých složitých detekčních úloh. Další informace o portfoliu…