Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem

Retroreflective sensor RL28-55-V-3974/47/82b/112

RL28-55-V-3974/47/82b/112
  • Foreground suppression, suited to recording of sheet-shrink-wrapped objects
  • Ultra bright LEDs for power on, weak signal indication and switching state
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Extra vibration proof version
  • Waterproof, degree of protection IP67

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   RL28-55-V-3974/47/82b/112

Popis produktu
Retroreflective sensor with polarization filter with foreground suppression
General specifications
Effective detection range0 ... 13 m
Reflector distance0.5 ... 13 m (blind range 0 ... 0.2 m faded out)
Threshold detection range17 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated visible red light , 660 nm
Polarization filteryes
Diameter of the light spotapprox. 220 mm at a distance of 13 m
Angle of divergenceemitter 1.2°
receiver 2°
Ambient light limit80000 Lux
Functional safety related parameters
MTTFd690 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green
Function indicator2 LEDs yellow, light up when light beam is free, flash when falling short of the stability control, off when light beam is interrupted
Control elementssensitivity adjustment (Adjustment to < 25% of the effective operating range) , Light-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current≤ 40 mA
Output
Pre-fault indication output1 PNP, inactive when falling short of the stability control for 10;s
immediately inactive if 4 light beam interruptions take place
Switching typelight/dark on switchable
Signal output2 PNP, complementary, short-circuit protected, reverse polarity protected , open collectors
Switching voltagemax. 30 V DC
Switching currentmax. 200 mA
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
UL approvalE87056 , cULus Listed , class 2 power supply , type rating 1
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width25.8 mm
Housing height88 mm
Housing depth65.5 mm
Degree of protectionIP67
Connection5-pin, M12 x 1 connector, 90° rotatable
Material
HousingPlastic ABS
Optical faceplastic
Connectormetal
Massapprox. 100 g

Documents: RL28-55-V-3974/47/82b/112

Instruction leafletsJazykTyp souboruVelikost souboru
Instruction leaflet / Beipackzettel ALLPDF383 KB

CAD+CAE: RL28-55-V-3974/47/82b/112

CADTyp souboruVelikost souboru
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS2748 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP1643 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: RL28-55-V-3974/47/82b/112

Statements of complianceČíslo certifikátuTyp souboruVelikost souboru
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2135APDF186 KB

Související produkty: RL28-55-V-3974/47/82b/112

Accessories
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket for rear wall mountingfa
Weld slag cover modelfa