Servisní linka pro průmyslové snímače
Servisní linka ochrany před výbuchem
Nedostupné pro prodej
Nedostupné pro prodej

Inclination sensor INY050D-F99-2U-Y266546

INY050D-F99-2U-Y266546
  • E1-Type approval
  • Analog output 0.5 ... 4.5 V
  • Fixed evaluation limits
  • High shock resistance
  • Increased noise immunity 100 V/m
  • Measuring range -25° ... +25°

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Stáhněte si kompletní katalogový list ve formátu PDF:


Výňatek z katalogového listu: Technická data   INY050D-F99-2U-Y266546

General specifications
TypeInclination sensor, 2-axis
Measurement range-25 ... 25 °
Absolute accuracy≤ ± 0.2 °
Response delay≤ 25 ms
Resolution≤ 0.05 °
Repeat accuracy≤ ± 0.1 °
Temperature influence≤ 0.004 °/K
Functional safety related parameters
MTTFd390 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED, green
Electrical specifications
Operating voltage10 ... 30 V DC
No-load supply current≤ 25 mA
Time delay before availability≤ 200 ms
Analog output
Output type2 voltage outputs 0.5 ... 4.5 V
(one output for each axis)
Load resistor≥ 1 kΩ
Compliance with standards and directives
Standard conformity
Shock and impact resistance100 g according to DIN EN 60068-2-27
StandardsEN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source
CSA approvalcCSAus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
E1 Type approval10R-04
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type0.35 m PUR cable 4 x 0.5 mm2 Deutsch connector DTM04-4PA
Housing materialPA
Degree of protectionIP68 / IP69K
Mass240 g
Dimensions
Height37 mm
Width45 mm
Length65 mm
Factory settings
Analog output (X)-25 ° ... 25 °
Analog output (Y)-25 ° ... 25 °

Classifications

SystemClasscode
ECLASS 13.027271101
ECLASS 12.027271101
ECLASS 11.027271101
ECLASS 10.0.127271101
ECLASS 9.027271190
ECLASS 8.027270790
ECLASS 5.127270790
ETIM 9.0EC011640
ETIM 8.0EC003965
ETIM 7.0EC002544
ETIM 6.0EC002544
ETIM 5.0EC002544
UNSPSC 12.141114624

Details: INY050D-F99-2U-Y266546

Design / Simulation: INY050D-F99-2U-Y266546

Výběr jazyka:
CADJazykTyp souboruVelikost souboru
CAD 3-D / CAD 3-DALLSTP791 KB