Support Industrielle sensorer
Support Explosion Protection

Retroreflective sensor ML7-55/59/82b/103/143

ML7-55/59/82b/103/143
  • Reliable sensor for standard applications
  • Miniature design with versatile mounting options
  • Automatic adjustment of sensitivity via TEACH-IN
  • Resistant against noise: reliable operation under all conditions
  • Clear and functional display concept for the operating modes
  • Certified by ECOLAB

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML7-55/59/82b/103/143

Produkt beskrivelse
Retroreflective sensor for standard applications, miniature design, polarization filter, front optical face, 3.5 m detection range, red light, dark on, PNP output, weak signal output, M8 plug
General specifications
Effective detection range0 ... 3 m
Reflector distance0.03 ... 3 m
Threshold detection range3.5 m
Reference targetH85-2 reflector
Light sourceLED
Light typemodulated visible red light
Polarization filteryes
Diameter of the light spotapprox. 180 mm at a distance of 3.5 m
Angle of divergenceapprox. 3 °
Ambient light limit40000 Lux
Functional safety related parameters
MTTFd1530 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, flashes in case of short-circuit
Function indicatorLED yellow, lights up when light beam is free, flashes when falling short of the stability control
Control elementsTeach-In key
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply current< 20 mA
Output
Pre-fault indication output1 PNP, inactive when level falls below function reserve after approx. 5 s.
Immediately inactive if the beam is interrupted 4 times during the flashtime.
Switching typedark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width23 mm
Housing height31 mm
Housing depth11 mm
Degree of protectionIP67 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Connectorplastic
Massapprox. 10 g

Documents: ML7-55/59/82b/103/143

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF439 KB

CAD+CAE: ML7-55/59/82b/103/143

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS509 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP402 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML7-55/59/82b/103/143

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0067BPDF186 KB
Certificates
EU Ecolab Cleaning and disinfection substances Material ResistanceEcolab-05092007PDF999 KB

Tilhørende produkter: ML7-55/59/82b/103/143

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting set consisting of bracket OMH-ML-01 sheet OMH-ML7-03, and fastening materialfa
Mounting set consisting of bracket OMH-ML-02 sheet OMH-ML7-03, and fastening materialfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Fixing platefa