Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
RL61-55-Z/92/127
Produkt beskrivelse |
Retroreflective sensor with polarization filter |
General specifications |
Effective detection range | 0 ... 18 m |
Reflector distance | 0.3 ... 18 m |
Threshold detection range | 25 m |
Reference target | FE-RR1 reflector |
Light source | LED |
Light type | modulated visible red light , 630 nm |
Polarization filter | yes |
Diameter of the light spot | approx. 350 mm at a distance of 18 m |
Opening angle | 1.1 ° |
Ambient light limit | 5000 Lux ; according to EN 60947-5-2 |
Indicators/operating means |
Operation indicator | 2 LEDs green |
Function indicator | 2 LEDs yellow on: reflector inside the sensing range off: reflector outside the sensing range |
Control elements | Light-on/dark-on changeover switch |
Control elements | Sensing range adjuster |
Control elements | Time adjuster ( 0 ... 50 ms ) |
Electrical specifications |
Operating voltage | 10 ... 30 V DC |
Ripple | 10 % |
No-load supply current | ≤ 35 mA |
Protection class | II , rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC |
Output |
Switching type | light/dark on, switchable |
Signal output | 2 NPN complementary, short-circuit protected, reverse polarity protected |
Switching voltage | max. 30 V DC |
Switching current | max. 100 mA |
Voltage drop | ≤ 2.5 V |
Switching frequency | 500 Hz |
Response time | ≤ 1 ms |
Timer function | DIP switch for selection of operating modes |
Compliance with standards and directives |
Standard conformity | |
| Product standard | EN 60947-5-2:2007 IEC 60947-5-2:2007 |
Approvals and certificates |
EAC conformity | TR CU 020/2011 |
UL approval | cULus |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) |
Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
Mass | 120 g |
Tightening torque, fastening screws | max. 2 Nm |
Dimensions | |
| Height | 73.7 mm |
| Width | 45 mm |
| Depth | 48.6 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
RL61-55-Z/92/127
Product Documentation:
RL61-55-Z/92/127
Design / Simulation:
RL61-55-Z/92/127
Approvals:
RL61-55-Z/92/127
Tilhørende produkter:
RL61-55-Z/92/127
Accessories |
|
|
|
Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
Mounting bracket with vertical slotsfa |
|
|
|
|
Mounting bracket with circular slotsfa |
|
|
|
|
Ball and Swivel Mounting Bracketfa |
|
|
|
|
Ball and Swivel Vertical Mounting Platefa |
|