Support Industrielle sensorer
Support Explosion Protection

Retroreflective sensor with polarization filter ML100-54/95/103

ML100-54/95/103
  • Miniature design
  • Easy to use
  • Very bright, highly visible light spot
  • Full metal thread mounting
  • Clearly visible LEDs for Power ON, switching state and weak signal indication
  • Not sensitive to ambient light

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML100-54/95/103

Produkt beskrivelse
Retroreflective sensor with polarization filter, plastic housing, 5 m detection range, red light, sensitivity adjuster, light/dark on, DC version, PNP output, M8 plug
General specifications
Effective detection range0 ... 3.5 m
Threshold detection range4.5 m
Light sourceLED
Light typemodulated visible red light
Polarization filteryes
Diameter of the light spotapprox. 350 mm at a distance of 4.5 m
Angle of divergenceapprox. 4 °
Functional safety related parameters
MTTFd860 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow: lights up when receiving the light beam ; flashes when falling short of the stability control; OFF when light beam is interrupted
Control elementssensitivity adjustment
Control elementsLight-on/dark-on changeover switch
Electrical specifications
Operating voltage10 ... 30 V DC
Output
Switching typeThe switching type of the sensor is adjustable. The default setting is: light on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007+A1:2012
Mechanical specifications
Degree of protectionIP67
Connectionconnector M8 x 1 , 4-pin
Material
HousingPC (Polycarbonate)
Optical facePMMA

Documents: ML100-54/95/103

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF498 KB

Approvals+Certificates: ML100-54/95/103

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0435DPDF163 KB
Certificates
USA UL E8705620181121-E87056PDF276 KB

Tilhørende produkter: ML100-54/95/103

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for ML100 seriesfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for round steel ø 12 mm or sheet 1.5 mm ... 3 mmfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aid for ML100 series, Mounting bracketfa
Mounting aidfa
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa
Reflector, round ø 84 mm, central mounting holefa
Reflector with mounting holesfa
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa
Reflector with screw fixingfa
Reflective tape 70 mm x 70 mmfa
Reflector with Micro-structure, rectangular 23 mm x 14 mm, diagonal mounting holefa