Support Industrielle sensorer
Support Explosion Protection

Multiturn absolute rotary encoder ENA42HD-S***-Analog

ENA42HD-S***-Analog
  • Very small housing
  • Sturdy construction
  • 4 Bit multiturn
  • Models with analog voltage or current output
  • Highly shock / vibration and soiling resistant
  • Increased shaft load capacity
  • Stainless steel housing
  • IP69K

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ENA42HD-S***-Analog

Produkt beskrivelse
Heavy-duty encoder
General specifications
Detection typemagnetic sampling
Device typeMultiturn absolute rotary encoder
Measurement rangemin. 0 ... 22.5 °
max. 16 x 360 °
Resolution17 Bit (13 bits/revolution)
UL File NumberE223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Electrical specifications
Operating voltage8 ... 32 V DC
Current consumptiontyp. 15 mA (with voltage output)
typ. 20 mA (with current output)
Input 1
Input typelower limit of measurement range
Signal voltage
High8 ... 32 V DC
Signal durationmin. 1 s
Input 2
Input typeupper limit of measurement range
Signal voltage
High8 ... 32 V DC
Signal durationmin. 1 s
Analog output
Output typeanalog voltage output or analog current output (see type code)
Default settingrising ramp at ccw rotation
Linearity error≤ 0.15 %
Load resistormin. 5000 Ω (with voltage output) , min. 500 Ω (with current output) ; Max. value for supply voltage 8 V. For higher supply voltage lower load resistance can be used.
Connection
ConnectorM12 connector, 5 pin
Cable2 m fixed cable , 5-wire , screened
Standard conformity
Degree of protectionIEC/EN 60529
Climatic testingDIN EN 60068-2-3 , 95 % , no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 300 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 30 g, 55 ... 2000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Flangeservo flange 42 mm with 4 x Threading M4
Shaft dimensions10 mm x 20 mm
Degree of protectionIP65 / IP67 / IP68 / IP69k
Material
HousingStainless steel 1.4404 / AISI 316L
FlangeStainless steel 1.4404 / AISI 316L
ShaftStainless steel 1.4412 / AISI 440B
Massapprox. 350 g
Rotational speedmax. 6000 min -1
Moment of inertia30 gcm2
Starting torque< 5 Ncm
Shaft load
Axial270 N
Radial270 N
Dimensions
Diameter42 mm

Classifications

SystemClasscode
ECLASS 13.027270502
ECLASS 12.027270502
ECLASS 11.027270502
ECLASS 10.0.127270502
ECLASS 9.027270502
ECLASS 8.027270502
ECLASS 5.127270502
ETIM 9.0EC001486
ETIM 8.0EC001486
ETIM 7.0EC001486
ETIM 6.0EC001486
ETIM 5.0EC001486
UNSPSC 12.139121527

Details: ENA42HD-S***-Analog

Product Documentation: ENA42HD-S***-Analog

Language Selection:
Brief InstructionsSprogFil typeFil størrelse
Instruction leaflet / BeipackzettelALLPDF1098 KB

Design / Simulation: ENA42HD-S***-Analog

Language Selection:
CADSprogFil typeFil størrelse
CAD Portal / CAD PortalALLLINK---
CAD Portal / CAD PortalALLLINK---

Approvals: ENA42HD-S***-Analog

Language Selection:
CertificatesCertifikat nr.SprogFil typeFil størrelse
US CA ULCoC 20190913-E223176 RptRef E223176-20081013ALLPDF280 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3163AALLPDF78 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-7156ALLPDF247 KB

Software: ENA42HD-S***-Analog

Language Selection:
Device Description Files/DriversUdgivelses infoFil typeFil størrelse
EDS file CANopen encoders Cxx58 / EDS-Datei für CANopen-Drehgeber Cxx58ZIP3 KB