Support Industrielle sensorer
Support Explosion Protection

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product OBD1000-R100-2EP-IO-V31

Diffuse mode sensor ML7-8-200/25/103/143

ML7-8-200/25/103/143
  • Miniature design
  • Automatic adjustment of sensitivity via TEACH-IN
  • Clearly visible function indicators
  • Flashing power on LED in case of short-circuit
  • Not sensitive to ambient light
  • Protected against mutual interference (no cross-talk)

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML7-8-200/25/103/143

Produkt beskrivelse
Diffuse mode sensor, miniature design, 200 mm adjustable detection range, red light, light on, PNP output, M8 plug
General specifications
Detection range20 ... 200 mm
Adjustment range60 ... 200 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated visible red light
Diameter of the light spotapprox. 15 mm at a distance of 200 mm
Angle of divergenceapprox. 4.5 °
Ambient light limit40000 Lux
Functional safety related parameters
MTTFd1610 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, flashes in case of short-circuit
Function indicatorLED yellow, lights up with receiver lit
Control elementsTeach-In key
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply current< 20 mA
Output
Switching typelight on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width23 mm
Housing height31 mm
Housing depth11 mm
Degree of protectionIP67 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Connectorplastic
Massapprox. 10 g

Documents: ML7-8-200/25/103/143

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF386 KB

CAD+CAE: ML7-8-200/25/103/143

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS509 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP402 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML7-8-200/25/103/143

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0067BPDF186 KB
Certificates
EU Ecolab Cleaning and disinfection substances Material ResistanceEcolab-05092007PDF999 KB

Tilhørende produkter: ML7-8-200/25/103/143

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting set consisting of bracket OMH-ML-01 sheet OMH-ML7-03, and fastening materialfa
Mounting set consisting of bracket OMH-ML-02 sheet OMH-ML7-03, and fastening materialfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Fixing platefa