Support Industrielle sensorer
Support Explosion Protection

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product OBD1000-R100-2EP-IO-V31

Diffuse mode sensor ML8-8-200-RT/103/143

ML8-8-200-RT/103/143
  • Miniature design
  • Yellow LED indicator behind the front panel
  • Flexible mounting possibilities due to slotted hole
  • Waterproof, degree of protection IP67
  • Protection class II

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML8-8-200-RT/103/143

Produkt beskrivelse
Diffuse mode sensor, miniature design, 200 mm adjustable detection range, red light, light on, PNP output, M8 plug
General specifications
Detection range20 ... 200 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED
Light typemodulated visible red light
Diameter of the light spotapprox. 15 mm at a distance of 200 mm
Angle of divergenceapprox. 4.5 °
Ambient light limit40000 Lux
Functional safety related parameters
MTTFd2340 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicatorLED yellow: switching state
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply current< 20 mA
Output
Switching typelight on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Response time1.8 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
Protection classII, rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width23 mm
Housing height31 mm
Housing depth11 mm
Degree of protectionIP67
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Connectorplastic
Massapprox. 10 g

Documents: ML8-8-200-RT/103/143

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF309 KB

CAD+CAE: ML8-8-200-RT/103/143

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS192 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP144 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML8-8-200-RT/103/143

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0710BPDF74 KB

Tilhørende produkter: ML8-8-200-RT/103/143

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting set consisting of bracket OMH-ML-01 sheet OMH-ML7-03, and fastening materialfa
Mounting set consisting of bracket OMH-ML-02 sheet OMH-ML7-03, and fastening materialfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Fixing platefa