Support Industrielle sensorer
Support Explosion Protection

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product OBT350-R100-2EP-IO-V31

Convergent mode sensor ML8-8-HGU-220-RT/59/103/143

ML8-8-HGU-220-RT/59/103/143
  • Miniature design
  • Background interference suppression
  • Mechanical adjustable detection range
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Flexible mounting possibilities due to slotted hole

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML8-8-HGU-220-RT/59/103/143

Produkt beskrivelse
Convergent mode sensor, 220 mm adjustable detection range, red light, dark on, PNP output, M8 plug
General specifications
Detection range5 ... 220 mm
Adjustment range100 ... 220 mm
Reference targetstandard white, 100 mm x 100 mm
Light sourceLED , 645 nm
Light typemodulated visible red light
Diameter of the light spotapprox. 10 mm at detection range 220 mm
Angle of divergenceapprox. 2.6 °
Ambient light limitEN 60947-5-2
Functional safety related parameters
MTTFd830 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicator2 LEDs yellow, light up in case of detection
Control elementsSensing range adjuster
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply current< 15 mA
Output
Switching typedark on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Switching frequency500 Hz
Response time≤ 1 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-30 ... 60 °C (-22 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width11 mm
Housing height31 mm
Housing depth23 mm
Degree of protectionIP65/IP67
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Connectorplastic
Massapprox. 10 g
Tightening torque, fastening screwsmax. 0.4 Nm

Documents: ML8-8-HGU-220-RT/59/103/143

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF338 KB

CAD+CAE: ML8-8-HGU-220-RT/59/103/143

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS2173 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP853 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML8-8-HGU-220-RT/59/103/143

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0710BPDF74 KB

Tilhørende produkter: ML8-8-HGU-220-RT/59/103/143

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting set consisting of bracket OMH-ML-01 sheet OMH-ML7-03, and fastening materialfa
Mounting set consisting of bracket OMH-ML-02 sheet OMH-ML7-03, and fastening materialfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Fixing platefa