Support Industrielle sensorer
Support Explosion Protection

Ikke tilgængelig for indkøb

This product has been replaced.Go to replacement product OBT350-R100-2EP-IO-V31

Convergent mode sensor ML8-8-HGU-50-RT/103/143/162

ML8-8-HGU-50-RT/103/143/162
  • Diffuse mode sensor with long, narrow light spot
  • Specially designed for detecting critical objects such as PCBs
  • Background interference suppression
  • Tamper-proof, no operating controls
  • Plug and Play
  • Not sensitive to ambient light, even with switched energy saving lamps

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML8-8-HGU-50-RT/103/143/162

Produkt beskrivelse
Diffuse mode sensor with special light spots for detecting PCBs, miniature design, background suppression, 50 mm detection range, red light, light on, PNP output, M8 plug
General specifications
Detection range25 ... 50 mm
Reference targetstandard black, 100 mm x 100 mm
Light sourceLED , 645 nm
Light typemodulated visible red light
Diameter of the light spotapprox. 4 mm x 35 mm at 50 mm
Angle of divergenceEmitter 1.5° vertical 35 ° horizontal
Ambient light limitEN 60947-5-2
Functional safety related parameters
MTTFd830 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Function indicator2 LEDs yellow, light up in case of detection
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply current< 20 mA
Output
Switching typelight on
Signal output1 PNP output, short-circuit protected, reverse polarity protected, open collector
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 1.5 V DC
Response time1 ms
Conformity
Product standardEN 60947-5-2
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Housing width23 mm
Housing height31 mm
Housing depth11 mm
Degree of protectionIP65 / IP67
ConnectionM8 x 1 connector, 4-pin
Material
HousingPC (glass-fiber-reinforced Makrolon)
Optical facePMMA
Connectorplastic
Massapprox. 10 g

Documents: ML8-8-HGU-50-RT/103/143/162

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF398 KB

CAD+CAE: ML8-8-HGU-50-RT/103/143/162

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS2173 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP853 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML8-8-HGU-50-RT/103/143/162

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of conformity / EU-KonformitätserklärungDOC-0710BPDF74 KB

Tilhørende produkter: ML8-8-HGU-50-RT/103/143/162

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting set consisting of bracket OMH-ML-01 sheet OMH-ML7-03, and fastening materialfa
Mounting set consisting of bracket OMH-ML-02 sheet OMH-ML7-03, and fastening materialfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Mounting bracketfa
Mounting aid for ML7 and ML8 series, Fixing platefa