Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Hent hele databladet som PDF:
Uddrag af datablad: Tekniske data for
RL61-8-4000-Z/92/136
| Produkt beskrivelse |
| Diffuse mode sensor |
| General specifications |
| Detection range | 0 ... 4000 mm adjustable |
| Adjustment range | 270 ... 4000 mm |
| Reference target | standard white 200 mm x 200 mm |
| Light source | IRED |
| Light type | modulated infrared light , 850 nm |
| Diameter of the light spot | approx. 45 mm at a distance of 4000 mm |
| Opening angle | 0.7 ° |
| Ambient light limit | 5000 Lux ; according to EN 60947-5-2 |
| Indicators/operating means |
| Operation indicator | 2 LEDs green |
| Function indicator | 2 LEDs yellow
ON: object inside the sensing range
OFF: object outside the sensing range |
| Control elements | Light-on/dark-on changeover switch |
| Control elements | Sensing range adjuster |
| Control elements | Time adjuster ( 0 ... 50 ms ) |
| Electrical specifications |
| Operating voltage | 10 ... 30 V DC |
| Ripple | 10 % |
| No-load supply current | ≤ 35 mA |
| Protection class | II , rated voltage ≤ 250 V AC with pollution degree 1-2 according to IEC 60664-1 Output circuit basis insulation of input circuit according to EN 50178, rated insulation voltage 240 V AC |
| Output |
| Switching type | light/dark on, switchable |
| Signal output | 2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected |
| Switching voltage | max. 30 V DC |
| Switching current | max. 100 mA |
| Voltage drop | ≤ 2.5 V |
| Switching frequency | 500 Hz |
| Response time | ≤ 1 ms |
| Timer function | DIP switch for selection of operating modes |
| Compliance with standards and directives |
| Standard conformity | |
| Product standard | EN 60947-5-2:2007
IEC 60947-5-2:2007 |
| Approvals and certificates |
| EAC conformity | TR CU 020/2011 |
| UL approval | cULus |
| CCC approval | CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature | -40 ... 55 °C (-40 ... 131 °F) |
| Storage temperature | -40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Degree of protection | IP67 |
| Connection | 4-pin, M12 x 1 connector |
| Material | |
| Housing | PC (Polycarbonate) |
| Optical face | PMMA |
| Mass | 120 g |
| Tightening torque, fastening screws | max. 2 Nm |
| Dimensions | |
| Height | 73.7 mm |
| Width | 45 mm |
| Depth | 48.6 mm |
Classifications
| System | Classcode |
| ECLASS 13.0 | 27270903 |
| ECLASS 12.0 | 27270903 |
| ECLASS 11.0 | 27270903 |
| ECLASS 10.0.1 | 27270903 |
| ECLASS 9.0 | 27270903 |
| ECLASS 8.0 | 27270903 |
| ECLASS 5.1 | 27270903 |
| ETIM 9.0 | EC001821 |
| ETIM 8.0 | EC001821 |
| ETIM 7.0 | EC001821 |
| ETIM 6.0 | EC001821 |
| ETIM 5.0 | EC001821 |
| UNSPSC 12.1 | 39121528 |
Details:
RL61-8-4000-Z/92/136
Product Documentation:
RL61-8-4000-Z/92/136
Design / Simulation:
RL61-8-4000-Z/92/136
Approvals:
RL61-8-4000-Z/92/136
Tilhørende produkter:
RL61-8-4000-Z/92/136
| Accessories |
|
|
|
| Female cordset single-ended M12 straight A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Female cordset single-ended M12 angled A-coded, 4-pin, PUR cable greyfa |
|
|
|
|
| Mounting bracket with vertical slotsfa |
|
|
|
|
| Mounting bracket with circular slotsfa |
|
|
|
|
| Ball and Swivel Mounting Bracketfa |
|
|
|
|
| Ball and Swivel Vertical Mounting Platefa |
|
+45 7010 4210