Support Industrielle sensorer
Support Explosion Protection
Ikke tilgængelig for indkøb

Background suppression sensor ML6-8-H-40-RT/DS/25/95/136

ML6-8-H-40-RT/DS/25/95/136
  • Dual sensor with two Light spots
  • Precise background suppression
  • Very small black-white difference
  • Light spot signals are directly connected to both independent switching outputs
  • Short circuit and low voltage indicator
  • Metal-reinforced fastening holes
  • Tamper-proof version with no adjustments

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   ML6-8-H-40-RT/DS/25/95/136

Produkt beskrivelse
Dual background suppression sensor for standard applications, miniature design, 40 mm adjustable detection range, light/dark on, red light, two push-pull outputs, M8 plug
General specifications
Detection range10 ... 40 mm
Detection range max.10 ... 50 mm
Background suppressionstarts from 50 mm
Light source2 LEDs
Light type660 nm visible red light
Black/White difference (6 %/90 %)approx. 3 mm
Diameter of the light spot2 light spots:
size 3.5 mm
distance 9 mm at 40 mm
Angle of divergenceapprox. 5 °
Ambient light limit
Continuous light40000 Lux
Modulated light5000 Lux
Functional safety related parameters
MTTFd1940 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green, statically lit Power on , Undervoltage indicator: Green LED, pulsing (approx. 0.8 Hz) , short-circuit : LED green flashing (approx. 4 Hz)
Function indicatorLEDs yellow: light up when object is detected
Electrical specifications
Operating voltage10 ... 30 V DC
Ripple10 %
No-load supply current< 20 mA
Output
Switching typelight on +UB
dark on: 0 V
Signal output2 push-pull (4 in 1) outputs, short-circuit protected, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 2.5 V DC
Switching frequency500 Hz
Response time1 ms
Conformity
Product standardEN 60947-5-2
Compliance with standards and directives
Standard conformity
Shock and impact resistanceIEC / EN 60068. half-sine, 40 g in each X, Y and Z directions
Vibration resistanceIEC / EN 60068-2-6. Sinus. 10 -150 Hz, 5 g in each X, Y and Z directions
Approvals and certificates
UL approvalcULus Listed
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Storage temperature-20 ... 75 °C (-4 ... 167 °F)
Mechanical specifications
Housing width13.9 mm
Housing height31.4 mm
Housing depth18 mm
Degree of protectionIP67 / IP69K
ConnectionM8 x 1 connector, 4-pin
Material
HousingABS
Optical facePMMA
Massapprox. 10 g

Documents: ML6-8-H-40-RT/DS/25/95/136

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF481 KB

CAD+CAE: ML6-8-H-40-RT/DS/25/95/136

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS153 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP101 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ML6-8-H-40-RT/DS/25/95/136

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-0708BPDF87 KB

Tilhørende produkter: ML6-8-H-40-RT/DS/25/95/136

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting Clampfa
Mounting bracket fa
Mounting bracket fa
Mounting bracket fa