Support Industrielle sensorer
Support Explosion Protection

Thru-beam sensor M41/MV41/25/76a/95/136

M41/MV41/25/76a/95/136
  • Rugged series in corrosion-resistant metal housing
  • Long sensor range with high power mode
  • Resistant against noise: reliable operation under all conditions
  • Clear and functional display concept for the operating modes
  • Aluminum housing with high quality Delta-Seal coated
  • Scratch-resistant and solvent resistant glass lens

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Hent hele databladet som PDF:


Uddrag af datablad: Tekniske data for   M41/MV41/25/76a/95/136

Produkt beskrivelse
Robust thru-beam sensor, compact housing design, 16 m detection range, emission frequency F1, red light and infrared light, light on, 2 push-pull outputs, test input, M8 plug
System components
EmitterM41/76a/95
ReceiverMV41/25/95/136
General specifications
Effective detection range0 ... 16 m
Threshold detection rangenormal mode: 25 m High power mode: 35 m (Control input at UB+)
Light sourcenormal mode: LED High power mode: LED+IRED
Light typenormal mode: modulated visible red light High power mode: Red and infrared, modulated light
Diameter of the light spotapprox. 500 mm at detection range 16 m
Angle of divergenceapprox. 1.5 °
Optical facefrontal
Ambient light limit50000 Lux
Functional safety related parameters
MTTFd844 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green: power on
Function indicatorReceiver: LED yellow, lights up when light beam is free, flashes when falling short of the stability control ; OFF when light beam is interrupted
Control elementssensitivity adjustment (receiver)
Electrical specifications
Operating voltage10 ... 30 V DC , class 2
Ripplemax. 10 %
No-load supply currentmax. 30 mA
Input
Test inputemitter deactivation at +UB (emitter)
Control inputHigh power mode activation with +UB (emitter)
Output
Switching typelight on
Signal output2 push-pull (4 in 1) outputs, complementary, short-circuit proof, reverse polarity protected
Switching voltagemax. 30 V DC
Switching currentmax. 100 mA
Voltage drop≤ 2.5 V DC
Switching frequency1000 Hz
Response time0.5 ms
Compliance with standards and directives
Directive conformity
EMC Directive 2004/108/ECEN 60947-5-2:2007
Standard conformity
Product standardEN 60947-5-2:2007
IEC 60947-5-2:2007
StandardsUL 508
Approvals and certificates
UL approvalcULus Listed, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature-40 ... 60 °C (-40 ... 140 °F)
Storage temperature-40 ... 75 °C (-40 ... 167 °F)
Mechanical specifications
Housing width31 mm
Housing height56.5 mm
Housing depth13.6 mm
Degree of protectionIP67
ConnectionM8 x 1 connector, 4-pin
Material
HousingAluminum , Delta-Seal coated
Optical faceglass pane
Connectormetal
Mass50 g (device)

Documents: M41/MV41/25/76a/95/136

Instruction leafletsSprogFil typeFil størrelse
Instruction leaflet / Beipackzettel ALLPDF629 KB

CAD+CAE: M41/MV41/25/76a/95/136

CADFil typeFil størrelse
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS1031 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP681 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: M41/MV41/25/76a/95/136

Statements of complianceCertifikat nr.Fil typeFil størrelse
EU-Declaration of conformity / EU-KonformitätserklärungDOC-1846BPDF87 KB

Tilhørende produkter: M41/MV41/25/76a/95/136

Accessories

Female cordset, M8, 4-pin, PUR cablefa

Female cordset, M8, 4-pin, PUR cablefa
Mounting bracket for Sensors series MLV41 for M12 rod mountingfa
Mounting bracket fa