NJ1,5-F-N Inductive sensor

Key Benefits at a Glance

Comfort series
1.5 mm non-flush

Product photo: Inductive sensor NJ1,5-F-N

Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN

CS
DE
EN
ES
FR
IT
PL
PT
SV

Datasheet Classification Product Documentation Design / Simulation Approvals

Technical data of NJ1,5-F-N

Switching function		Normally closed (NC)
Output type		NAMUR
Rated operating distance	s_n	1.5 mm
Installation		non-flush
Assured operating distance	s_a	0 ... 1.22 mm
Reduction factor r_Al		0.4
Reduction factor r_Cu		0.3
Reduction factor r₃₀₄		0.85
Output type		2-wire

Nominal voltage

U_o

8.2 V (R_i approx. 1 kΩ)

Switching frequency

f

0 ... 5000 Hz

Hysteresis

H

typ. %

Current consumption

Measuring plate not detected		min. 3 mA
Measuring plate detected		≤ 1 mA

MTTF_d		8734 a
Mission Time (T_M)		20 a
Diagnostic Coverage (DC)		0 %

Standard conformity

NAMUR		EN 60947-5-6:2000 IEC 60947-5-6:1999
Standards		EN IEC 60947-5-2

IECEx approval

Equipment protection level Gb		IECEx PTB 11.0021X
Equipment protection level Da		IECEx PTB 11.0021X
Equipment protection level Mb		IECEx PTB 11.0021X

ATEX approval

Equipment protection level Gb		PTB 00 ATEX 2032 X
Equipment protection level Da		PTB 00 ATEX 2032 X

UL approval

cULus Listed, General Purpose

CCC approval

Hazardous Location

2020322315002302

NEPSI approval

NEPSI certificate

GYJ16.1394X

CML approval

on request

ANZEx

19.3001X

Ambient temperature

-25 ... 100 °C (-13 ... 212 °F)

Connection type

flexible leads

Housing material

PBT

Sensing face

PBT

Degree of protection

IP68

Cable

Material		LIFYW
Core cross section		0.06 mm²
Length	L	500 mm

Mass

2 g

Dimensions

Height		10 mm
Width		8 mm
Length		8 mm

Use in the hazardous area

see instruction manuals

General Notes