Select Your Country

Go to global website

  1. en
  2. Products
  3. Industrial Sensors
  4. Photoelectric Sensors
  5. Retroreflective Sensors
  6. VL18-54-MS/40a/118/128

VL18-54-MS/40a/118/128 Retroreflective sensor

Key Benefits at a Glance

  • Array control panel with highly visible LED display
  • Flashing power on LED in case of short-circuit
  • Optical face lateral, flush to the housing
  • Multiple device installation possible, no mutual interference (no cross-talk)
  • Not sensitive to ambient light, even with switched energy saving lamps
  • Protection class II

Show more

Please contact us for exact delivery estimation.
Product photo: Retroreflective sensor VL18-54-MS/40a/118/128
Dimensions: Retroreflective sensor VL18-54-MS/40a/118/128
Connection Assignment: Retroreflective sensor VL18-54-MS/40a/118/128
Product photo: Retroreflective sensor VL18-54-MS/40a/118/128
Dimensions: Retroreflective sensor VL18-54-MS/40a/118/128
Connection Assignment: Retroreflective sensor VL18-54-MS/40a/118/128
Product Compliance: United Kingdom – UKCA
Product Compliance: USA - cULus
Product Compliance: Europe – CE
Product Compliance: EU - protection class II
Note

All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

EN
  • DE
  • EN
  • ES
  • FR
  • ZH
DatasheetClassificationProduct DocumentationDesign / SimulationApprovalsRelated Products

Technical data of VL18-54-MS/40a/118/128

Retroreflective sensor with polarization filter
Effective detection range0 ... 3.5 m
Threshold detection range4 m
Reference targetH50 reflector
Light sourceLED
Light typemodulated visible red light , 632 nm
Polarization filteryes
Diameter of the light spot160 mm at a distance of 3500 mm
Opening angle3 °
Optical facelateral
Ambient light limit30000 Lux ; according to EN 60947-5-2:2007
HysteresisH< 15 %
MTTFd700 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Operation indicatorLED green, flashes in case of short-circuit
Function indicatorLED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted
Control elementsSensitivity adjuster, light/dark switch
Operating voltageUB10 ... 30 V DC , class 2
No-load supply currentI0< 25 mA
Protection classII , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1
Switching typelight/dark on, switchable
Signal outputPush-pull (4 in 1) output short-circuit protected overvoltage protected
Switching voltage30 V DC
Switching currentmax. 200 mA
Voltage dropUd≤ 2.5 V DC
Switching frequencyf500 Hz
Response time1 ms
Product standardEN 60947-5-2
EAC conformityTR CU 020/2011
UL approvalcULus Listed, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Storage temperature-30 ... 70 °C (-22 ... 158 °F)
Relative humidity90 % , noncondensing
Degree of protectionIP67
Connection4-pin, M12 x 1 connector
Material
Housingbrass, nickel-plated
Optical facePMMA
Mass60 g
Dimensions
Length65 mm
Diameter18 mm
General Notes