Triangulation sensor with background suppression, 200 mm adjustable detection range, infrared light, light/dark ON, NPN output, fixed cable with connector, Miniature design, Full metal thread mounting, Infrared light designfa
The new HF RFID read/write devices from Pepperl+fuchs combine an incomparably high read range and a wide variety of helpful additional features in a space-saving, optimized flat-pack design ... to the Pepperl+Fuchs portfolio are among the few HF read/write devices of this class on the market that also support multitag detection : Up to 20 RFID tags can be detected simultaneously in just one read operation, therefore achieving quick ...
Even under the most adverse outdoor conditions, the F31K2 dual inductive sensor reliably monitors the correct position of valves ... . Therefore, neither isolated switch amplifiers nor intrinsically safe wiring are required when using these devices. For hazardous areas up to Zone 0/20 , the intrinsically safe NAMUR version of the F31K2 provides the appropriate ATEX and IECEx approvals. This ...
Erfahren Sie mehr zu den Haftungshinweisen zur Nutzung der Pepperl+Fuchs Website ... , modifications or additions. The Terms of Use were last updated on May the 4 th 2018. 8. Maintenance of Hardware and equipments User shall be responsible for obtaining and maintaining all telecommunication, computer hardware and other equipment needed for access ...
Pepperl+Fuchs' rotary encoders are used to slow and control the speed of a process, resulting in increased efficiency ... encoder is adapted to the mechanical, electrical and environmental demands in drive technology . By extending the temperature range to 115 °C and the vibration resistance to 20 g, it is very sturdy and meets the tough demands of varied industrial ...
Find out more about the setup options for industrial radar sensors from Pepperl+Fuchs ... associated reaction speed, a high sampling rate i s also required. This can be set via parameters up to a maximum of 200 Hz. In addition to this, radar sensors can also be used to effectively reduce the maximum speed of forklift trucks: While high speed is ...
Explore the FAQ in the Pepperl+Fuchs knowledge base to learn more about fault repairs for inductive sensors ... for "Low", i.e., low residual current. The residual current via the open contact is between 100 µA ... 200 µA, compared to 0.4 mA ... 0.6 mA of conventional two-wire sensors from Pepperl+Fuchs. These two-wire sensors can replace three-wire sensors ...
The process industry is picking up on digital data transfer via fieldbus The advantages are clear: much less wiring saves costs and time during planning, installation and commissioning ... effort and longer system operation times. Fieldbus and 4…20 mA technology have more in common in installation than immediately is visible. Cables have to be laid properly. Shielding and grounding concepts are comparable and must be selected correctly for ...
Get a basic overview of various radar technology and radar sensor technology terms in the Pepperl+Fuchs glossary ... (e.g., air), this material reduces the propagation speed accordingly, depending on its permittivity and permeability. Nevertheless, it remains in a range that is far superior to sound (343.2 m/s in dry air at 20 °C). Voltage controlled oscillator (VCO ...
Pepperl+Fuchs offers you an end-to-end IO-Link system solution that includes a range of IO-Link sensors and infrastructure ... Efficiency and Sustainable Cost Reduction IO-Link boasts both easy operation and a reduced range of interfaces! A three-core unshielded cable enables an up to 20 meter connection between the IO-Link master and device. IO-Link Minimizes Downtime IO-Link ...
Fieldbus: Commissioning with Advanced Diagnostic Tools The Advanced Diagnostic Module from Pepperl+Fuchs monitors the fieldbus physical layer during operation Measurements are accessible in the cont ... when compared to 4…20 mA technology. One device is connected per cable and the load current shows it all: measurement value, cable breakage as well as short circuit conditions. The Advanced Diagnostic Module monitors the fieldbus physical layer during ...
171-180/184Items Per Page:
No results found?
Hint: Use wildcard character * before your search term, modify your search, check your search terms for misspellings, or contact us with your specific request.