Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot
VL18-54-MS/32/40a/82b/118
Tuotekuvaus |
Retroreflective sensor with polarization filter |
General specifications |
Effective detection range | 0 ... 3.5 m |
Threshold detection range | 4 m |
Reference target | H50 reflector |
Light source | LED |
Light type | modulated visible red light , 632 nm |
Polarization filter | yes |
Diameter of the light spot | 160 mm at a distance of 3500 mm |
Opening angle | 3 ° |
Optical face | lateral |
Ambient light limit | 30000 Lux ; according to EN 60947-5-2:2007 |
Hysteresis | < 15 % |
Functional safety related parameters |
MTTFd | 700 a |
Mission Time (TM) | 20 a |
Diagnostic Coverage (DC) | 0 % |
Indicators/operating means |
Operation indicator | LED green, flashes in case of short-circuit |
Function indicator | LED yellow, light with free light beam , flashes when falling short of the operating reserve , OFF when light beam is interrupted |
Control elements | Sensitivity adjuster, light/dark switch |
Electrical specifications |
Operating voltage | 10 ... 30 V DC , class 2 |
No-load supply current | < 25 mA |
Protection class | II , rated voltage ≤ 50 V AC with pollution degree 1-2 according to IEC 60664-1 |
Output |
Stability alarm output | 1 PNP, inactive when falling short of the stability control |
Switching type | light/dark on, switchable |
Signal output | 1 PNP output, short-circuit protected, reverse polarity protected, open collector |
Switching voltage | 30 V DC |
Switching current | max. 200 mA |
Voltage drop | ≤ 2.5 V DC |
Switching frequency | 500 Hz |
Response time | 1 ms |
Conformity |
Product standard | EN 60947-5-2 |
Approvals and certificates |
EAC conformity | TR CU 020/2011 |
UL approval | cULus Listed, Type 1 enclosure |
CCC approval | CCC approval / marking not required for products rated ≤36 V |
Ambient conditions |
Ambient temperature | -25 ... 70 °C (-13 ... 158 °F) |
Storage temperature | -30 ... 70 °C (-22 ... 158 °F) |
Relative humidity | 90 % , noncondensing |
Mechanical specifications |
Degree of protection | IP67 |
Connection | 4-pin, M12 x 1 connector |
Material | |
| Housing | brass, nickel-plated |
| Optical face | PMMA |
Mass | 60 g |
Dimensions | |
| Length | 65 mm |
| Diameter | 18 mm |
Classifications
System | Classcode |
ECLASS 13.0 | 27270902 |
ECLASS 12.0 | 27270902 |
ECLASS 11.0 | 27270902 |
ECLASS 10.0.1 | 27270902 |
ECLASS 9.0 | 27270902 |
ECLASS 8.0 | 27270902 |
ECLASS 5.1 | 27270902 |
ETIM 9.0 | EC002717 |
ETIM 8.0 | EC002717 |
ETIM 7.0 | EC002717 |
ETIM 6.0 | EC002717 |
ETIM 5.0 | EC002717 |
UNSPSC 12.1 | 39121528 |
Details:
VL18-54-MS/32/40a/82b/118
Product Documentation:
VL18-54-MS/32/40a/82b/118
Design / Simulation:
VL18-54-MS/32/40a/82b/118
Approvals:
VL18-54-MS/32/40a/82b/118
Liitännäistuotteet:
VL18-54-MS/32/40a/82b/118
Accessories |
|
|
|
Mounting adapter, 18 mm, fixture for all cylindrical sensors with M18 thread, easy to install and precisely adjust, large adjustment range (max. 20 mm)fa |
|
|
|
|
Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa |
|
|
|
|
Mounting Bracket with swivel nutfa |
|
|
|
|
Plastic mounting adapter, 18 mmfa |
|
|
|
|
Reflector, rectangular 84.5 mm x 84.5 mm, mounting holesfa |
|
|
|
|
Reflector, rectangular 51 mm x 61 mm, mounting holes, fixing strapfa |
|