Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Vibration sensor VIM32PL-E1AC8-0RE-IO-1V1401

VIM32PL-E1AC8-0RE-IO-1V1401
  • Vibration velocity in mm/s via root mean square formation (rms)
  • Vibration acceleration in g via root mean square formation (rms)
  • IO-Link Interface for process data, parameterization and diagnosis
  • Switching output and current output parameterizable
  • Additional temperature value output
  • Rugged stainless steel housing

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  VIM32PL-E1AC8-0RE-IO-1V1401

Tuotekuvaus
Vibration sensor with IO-Link and programmable switching output or analog current output
General specifications
TypeVibration sensor
Measuring technologyMEMS
SeriesPerformance Line
Measured variableVibration velocity
Vibration acceleration
Temperature
Measurement range
Vibration velocity0 ... 128 mm/s
Vibration acceleration0 ... 10 g rms
Temperature-40 ... 85 °C (-40 ... 185 °F)
Measurement accuracyVibration velocity: ± 0.1 mm/s (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954 for measurement range greater than 8 mm/s
Vibration acceleration: ± 0.01 g (calibration point: 90% of the measuring range; 159.2 Hz) Complies with the tolerance requirements of DIN ISO 2954
Cross-sensitivity< 5 % of the partial lateral acceleration, which acts exactly 90° to the measuring axis
ResolutionVibration velocity: 0.01 mm/s
Vibration acceleration: 0.01 g
Frequency range10 ... 1000 Hz
Averaging timefor v-rms: 2 s
for a-rms: 2 s
Functional safety related parameters
MTTFd329 a
Mission Time (TM)20 a
Diagnostic Coverage (DC)0 %
Electrical specifications
Fusingexternal fuse is required: 1 A , fast acting , 30 V DC
Operating voltage18 ... 30 V DC
Current consumptionmax. 700 mA
Power consumptionmax. 21 W
Time delay before availability≤ 1 s
Surge protectionup to 2 kV
Interface
Interface typeIO-Link (via C/Q = Pin 4)
IO-Link revision1.1
Device profileIdentification and Diagnosis - I&D
Process dataInput 16 Byte
measurement channels:
-rms value velocity
- peak value acceleration
- rms value acceleration
- temperature
per measurement channel:
- measurement value 2 Byte
- scaling 8 Bit
- switching signals 2 Bit
status data
Vendor ID1 (0x0001)
Device ID5308417 (0x510001)
Transfer rateCOM2 (38.4 kBit/s)
Min. cycle time5 ms
SIO mode supportyes
Compatible master port typeClass A
Class B (use 3-pole adapter or 3-wire cable)
Output 1
Output typeC/Q - Pin 4 in SIO mode (switching signal of the measured variable is programmable)
Switching functionNormally open/closed (NO/NC)
Operating current≤ 100 mA
Short-circuit protectionyes
Output 2
Output typeI/Q - pin 2 (parameterizable as analog current output or switching signal)
- I: analog output for the measured variable, current 4 ... 20 mA
- Q: switching signal of the measured variable is parameterizable, PNP normally open
Switching functionNormally open/closed (NO/NC)
Operating current≤ 120 mA for switching signal
Voltage drop< 2 V
Output current4 ... 20 mA at analog output
Load resistor≤ 500 Ω at analog output
Short-circuit protectionyes
Standard conformity
Degree of protectionDIN EN 60529, IP66, IP67
Shock resistanceDIN EN 60068-2-27, 60 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 16.5 g, 10 ... 1000 Hz
Approvals and certificates
UL approval
Ordinary LocationE468231 cULus Listed, Class III Power Source and limited energy , if UL marking is marked on the product. For use in NFPA 70 Applications only.
adapters providing field wiring on request
Maximum permissible ambient temperaturemax. 80 °C (max. 176 °F)
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typeplug
Housing materialStainless steel 1.4305 / AISI 303
Degree of protectionIP66 / IP67 only in connected state
Connector
ThreadingM12
Number of pins4
Massapprox. 100 g
Dimensions
Length72.5 mm
Diameter23.8 mm

Classifications

SystemClasscode
ECLASS 13.027271103
ECLASS 12.027201406
ECLASS 11.027201406
ECLASS 10.0.127201406
ECLASS 9.027201406
ECLASS 8.027201406
ECLASS 5.127201406
ETIM 9.0EC004309
ETIM 8.0EC004309
ETIM 7.0EC002959
ETIM 6.0EC002959
ETIM 5.0EC001758
UNSPSC 12.141114624

Details: VIM32PL-E1AC8-0RE-IO-1V1401

Function

The vibration sensor determines the vibration quantity using rms (root meas square) averaging. This form of quadratic averaging or pre-filtering enables precise trend statements about the condition of the application.

The integrated IO-Link interface provides an optimal adaption to different applications through parameterization and process data transmission for condition monitoring.

The simple mounting allows for commissioning in any application.

Informative Literature: VIM32PL-E1AC8-0RE-IO-1V1401

Language Selection:
LiteratureKieliTiedostotyyppiTiedoston koko
Product Overview - Vibration SensorsENGPDF1351 KB
Application Report - Servicing Mobile Concrete Mixers According to Actual NeedsENGPDF169 KB

Product Documentation: VIM32PL-E1AC8-0RE-IO-1V1401

Language Selection:
Product informationKieliTiedostotyyppiTiedoston koko
Installation and user instructions for offline parameterization of IO-Link sensorsENGPDF1788 KB
Brief Instructions
Instruction leaflet / BeipackzettelALLPDF252 KB
Manuals
Manual VIM3*-IO-* Vibration SensorsENGPDF2011 KB
Parameter Information
Brief instructionsENGPDF933 KB

Design / Simulation: VIM32PL-E1AC8-0RE-IO-1V1401

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP2534 KB
CAE
CAE EPLAN Data Portal / CAE EPLAN Data PortalALLLINK---
CAE EPLAN macro EDZ / CAE EPLAN Makro EDZALLEDZ87 KB

Approvals: VIM32PL-E1AC8-0RE-IO-1V1401

Language Selection:
CertificatesSertifikaatin nroKieliTiedostotyyppiTiedoston koko
IO-Link Manufacturer DeclarationCERT-6798ALLPDF402 KB
Declaration of Conformity
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-6865ALLPDF325 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6866ALLPDF249 KB

Software: VIM32PL-E1AC8-0RE-IO-1V1401

Language Selection:
Device Description Files/DriversJulkaisutiedotTiedostotyyppiTiedoston koko
IODD for VIM32PL-*A*-0*-*01 / IODD für VIM32PL-*A*-0*-*01V1.00.000 / 2022-09-30ZIP228 KB
DTM (Device Type Manager) Package for VIM3***-**A**-***-IO-****** vibration sensor / DTM (Device Type Manager) Package für VIM3***-**A**-***-IO-****** SchwingungssensorV1.0.0.6ZIP16546 KB
Software Tools
IO-Link Offline Parameterization Tool / IO-Link Offline-ParametriertoolV1.00.006 / 2022-07-10ZIP96138 KB

Liitännäistuotteet: VIM32PL-E1AC8-0RE-IO-1V1401

Accessories

Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable greyfa
EMC adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 8fa
Mounting adapter for VIM3*/VIM6*/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M8 x 1.25, screw-in depth 19.5fa
Mounting adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa
Mounting adapter for VIM3*/VIM6*/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M30 x 3.5, screw-in depth 45fa
Protective rubber sleeve for VIM3* vibration sensors against ingress of moisture and mechanical effectsfa
Mounting adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, external thread NPT1/2", screw-in depth 24fa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa
IO-Link master, supply via USB port or separate power supply, LED indicators, M12 plug for sensor connectionfa
Cordset M12 socket straight to M12 plug straight A-coded, 4-pin, PUR cable black, UL-approved, drag chain suitable, torsion resistantfa
Mounting adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, external thread M6 x 1.0, screw-in depth 10fa
Mounting adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, external thread M10 x 1.5, screw-in depth 18fa
Mounting adapter for VIM3*/VIM6*/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M16 x 2.0, screw-in depth 27fa
Mounting adapter for VIM3*/VIM6*/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M20 x 2.5, screw-in depth 34fa
Mounting adapter for VIM3*/VIM6*/VIM8* vibration sensors, internal thread M8 x 1.25 x 10, external thread M24 x 3.0, screw-in depth 40fa
Magnetic adapter for VIM3*/VIM6* vibration sensors, internal thread M8 x 1.25 x 10, holding force 35 kgfa