Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Inductive sensor NBB8-18GM40-EU-M1-300MM-3DT04

NBB8-18GM40-EU-M1-300MM-3DT04
  • 8 mm flush
  • 0.5 / 4.5 VDC switching output for mobile equipment controls
  • Extended temperature range
    -40 ... +85 °C
  • 3-pin Deutsch connector (DT04)
  • Highly shock and vibration resistant
  • Raised EMC resistance 30 V/m
  • With increased sealing, protection class
    IP68 / IP69K

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  NBB8-18GM40-EU-M1-300MM-3DT04

General specifications
Output typeDigital voltage output
Rated operating distance8 mm
Installationflush
Output polarityDC
Assured operating distance0 ... 6.48 mm
Actuating elementmild steel, e. g. 1.0037, SR235JR (formerly St37-2)
24 mm x 24 mm x 1 mm
Reduction factor rAl 0.4
Reduction factor rCu 0.3
Reduction factor r304 0.7
Reduction factor rBrass 0.45
Output type3-wire
Nominal ratings
Operating voltage7 ... 30 V DC
Switching frequency0 ... 1600 Hz
Hysteresis2 ... 15 %
Reverse polarity protectionreverse polarity protected
Short-circuit protectionyes
Temperature drift≤ 10 %
No-load supply current≤ 15 mA
Time delay before availability≤ 100 ms
Load resistormin. 20 kΩ
Switching state indicatorLED, yellow
Digital output
Output valueobject detected: 4.5 V ± 0.2 V
object not detected: 0.5 V ± 0.2 V
Compliance with standards and directives
Standard conformity
StandardsEN IEC 60947-5-2
Ambient conditions
Ambient temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection typefixed cable with plug
Housing materialbrass , white bronze coated
Sensing facePBT , green
Degree of protectionIP68 / IP69K
Connector
Connection assemblyDeutsch connector DT04-3P-CE02
Deutsch contact 1060-16-0622
Deutsch wedge W3P
Cable
Cable diameter6 mm ± 0.2 mm
Bending radius> 6 x cable diameter
MaterialPUR
Colorblack
Number of cores3
Core cross section0.75 mm2
Length285 mm ± max. 10 mm
Dimensions
Length46 mm
Diameter18 mm
General information
Scope of delivery2 self locking nuts in scope of delivery

Classifications

SystemClasscode
ECLASS 13.027274001
ECLASS 12.027274001
ECLASS 11.027270101
ECLASS 10.0.127270101
ECLASS 9.027270101
ECLASS 8.027270101
ECLASS 5.127270101
ETIM 9.0EC002714
ETIM 8.0EC002714
ETIM 7.0EC002714
ETIM 6.0EC002714
ETIM 5.0EC002714
UNSPSC 12.139121550

Details: NBB8-18GM40-EU-M1-300MM-3DT04

Informative Literature: NBB8-18GM40-EU-M1-300MM-3DT04

Language Selection:
We are sorry, there are no documents for your language selection. Please select another language.

Approvals: NBB8-18GM40-EU-M1-300MM-3DT04

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-5738ALLPDF1230 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-5739ALLPDF1224 KB

Liitännäistuotteet: NBB8-18GM40-EU-M1-300MM-3DT04

Accessories

Universal mounting bracket for cylindrical sensors with a diameter of 5 ... 30 mmfa

fa
Mounting Bracket with swivel nutfa
Plastic mounting adapter, 18 mmfa

Our amplify article gives interesting insights about the development of the new, modern portfolio of inductive proximity sensors from Pepperl+Fuchs. Get the whole story here! 

 

 

Knowledge Base for Inductive Sensors

The knowledge base for inductive sensors contains extensive expertise and supports you in the highly precise and smooth operation of the sensors in your machinery and plants.

VariKont with Active Shielding Technology

The VariKont inductive sensors with Active Shielding Technology ensure high switching distances, no matter the installation situation and the surrounding material. Benefit from easier equipment design and reduced costs!

Inductive Safety Sensors SIL 2 PL d

As the SIL 2/PL d inductive safety sensors have no dead band, data transfer can occur with no minimum distance between sensor and target. Discover the optimized portfolio for demanding environments.