Serviceline
Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Inductive sensor 973EX4WI-A10T

973EX4WI-A10T
  • 7 mm flush
  • 2-wire AC/DC
  • Explosion-proof housing
  • Stainless steel sensing face
  • UL and CSA listed for use in Class I, II, and III, Division 1 and 2 hazardous locations

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot 973EX4WI-A10T

General specifications
Switching functionNormally open (NO)
Rated operating distance7 mm
Installationflush
Output polarityAC/DC
Nominal ratings
Operating voltage20 ... 250 V AC/DC
Switching frequency15 Hz
Hysteresis2 ... 15 % 5 typ.
Reverse polarity protectionreverse polarity protected
Short-circuit protectionno
Voltage drop≤ 7 V
Operating current8 ... 200 mA
Off-state current1.7 mA
Approvals and certificates
UL approvalUL 1203
CSA approvalCSA 22.2, no. 30-M1986
Ambient conditions
Ambient temperature-25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection typecable PVC , 2 m
Core cross-section2 x 0.75 mm2
Housing materialstainless steel (303/1.4305)
Sensing facestainless steel (303/1.4305)
Housing diameter30 mm
Degree of protectionIP67 / IP68

CAD+CAE: 973EX4WI-A10T

CADTiedostotyyppiTiedoston koko
3-D model in IGS format / 3-D-Modell im IGS-FormatIGS130 KB
3-D model in STP format / 3-D-Modell im STP-FormatSTP58 KB
CAD Portal / CAD PortalLINK---

Approvals+Certificates: 973EX4WI-A10T

CertificatesSertifikaatin nroTiedostotyyppiTiedoston koko
CA CSA096321_0_000LINK---
US UL General PurposeE199034LINK---