Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291
Not available for purchase
Not available for purchase

Initiator tester 1-1350

1-1350
  • 2-way LED indicator for switch status

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  1-1350

Tuotekuvaus
Initiator tester
Electrical specifications
Operating voltage18 V, two 9 V block batteries included with delivery
Mechanical specifications
Connection4 connection terminals
for 0 V, 18 V (pulsed, testoutput 1 and 2)
Dimensions110 mm x 68 mm x 33 mm
NoteNAMUR sensors are not tested in accordance with EN 60079-11

Classifications

SystemClasscode
ECLASS 13.019200504
ECLASS 12.019200504
ECLASS 11.019200504
ECLASS 10.0.119200504
ECLASS 9.019200504
ECLASS 8.027279211
ECLASS 5.127279211
ETIM 9.0EC000305
ETIM 8.0EC000305
ETIM 7.0EC000305
ETIM 6.0EC000305
ETIM 5.0EC003015
UNSPSC 12.141113642

Details: 1-1350

Function

The proximity switch testing device 1-1350 is suitable for testing all DC initiators in 2, 3 and 4-wire technology (npn and pnp).

Either 0 V, 18 V or a sensor test signal are available via four connections on the front of the housing. The functional state and the battery state of the device can be tested and indicated via an LED via a push button.

Approvals: 1-1350

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-3888AALLPDF204 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6680ALLPDF113 KB