Serviceline
Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Incremental rotary encoder RVI70E

RVI70E
  • Up to 5000 ppr
  • Flameproof enclosure
  • Worldwide certification: ATEX, IECEx, KOSHA, NEPSI
  • Degree of protection IP66 / IP67
  • High shaft load capacity
  • Temperature range -40 ... 158 °F (-40°C to 70°C)
  • Siutable for offshore applications

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot RVI70E

General specifications
Detection typephotoelectric sampling
Device typeIncremental rotary encoder
Pulse countmax. 5000
Functional safety related parameters
MTTFd140 a
Mission Time (TM)20 a
L10h1.6 E+9 at 3000 rpm
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage10 ... 30 V DC or 5 V DC ± 5 % (see "Output circuit" in the ordering information)
No-load supply currentmax. 60 mA
Output
Output typepush-pull, incremental or RS 422, incremental
(see "Output circuit" in the ordering information)
Voltage drop< 4 V (push-pull, incremental)
Load currentmax. per channel 40 mA , short-circuit protected, reverse polarity protected (push-pull, incremental)
max. per channel 20 mA , short-circuit protected, reverse polarity protected (RS 422, incremental)
Output frequencymax. 200 kHz
Rise time250 ns
De-energized delay250 ns
Connection
Cable&Empty; 10.2 mm, Radox 9 x 0.5 mm2
Standard conformity
Degree of protectionDIN EN 60529, IP66 DIN EN 60529, IP67
Climatic testingDIN EN 60068-2-78 , no moisture condensation
Emitted interferenceEN 61000-6-4:2007/A1:2011
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 3 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Ambient conditions
Operating temperature
Gas Ex-area-40 ... 70 °C (-40 ... 158 °F)
Dust Ex-area-40 ... 70 °C (-40 ... 158 °F)
Storage temperature
Gas Ex-area-40 ... 70 °C (-40 ... 158 °F)
Dust Ex-area-40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Material
Combination 1housing: anodized aluminum
flange: anodized aluminum
shaft: Stainless steel 1.4401 / AISI 316
Combination 2 (Inox)housing: Stainless steel 1.4401 / AISI 316
flange: Stainless steel 1.4401 / AISI 316
shaft: Stainless steel 1.4401 / AISI 316
Massapprox. 1300 g (combination 1)
approx. 2300 g (combination 2)
Rotational speedmax. 6000 min -1
Moment of inertia400 gcm2
Starting torque< 5 Ncm
Shaft load
Axial110 N
Radial150 N
Data for application in connection with hazardous areas
EU-Type Examination CertificateZELM 14 ATEX 0519 X
IECEx ZLM 14.0003X
MarkingEx-Hexagon II 2G Ex db IIC T6 - T4 Gb
Ex-Hexagon II 2D Ex tb IIIC T80°C Db
Directive conformity
Directive 94/9/ECIEC 60079-0:2011 EN 60079-0:2012+A11:2013 IEC 60079-1:2014 EN 60079-1:2014 IEC 60079-31:2013 EN 60079-31:2014

Documents: RVI70E

Instructions, short instructions, safety informationKieliTiedostotyyppiTiedoston koko
Operating instructions RVI70EENGPDF817 KB
Betriebsanleitung RVI70EGERPDF820 KB

Approvals+Certificates: RVI70E

CertificatesSertifikaatin nroTiedostotyyppiTiedoston koko
/cert/cert3475a.pdf14-AV4BO-0762/0763PDF140 KB
China NEPSIGYJ14.1400XPDF2954 KB
EU ZELM ATEX Category (2) G DZELM 14 ATEX 0519XPDF1566 KB
Worldwide ZELM IECEx Certificate of ConformityIECEX ZLM 14.0003XLINK---

Liitännäistuotteet: RVI70E

Accessories
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Precision coupling, Precision couplingfa
Stainless steel bellows coupling, Backlash-free, angle synchronous rotation transmission, Optimall misalignment compensation, Very high torsion spring stiffness, Small reset forces, Vibration- isolatingfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Measuring wheel for shaft diameter 10 mm, Plastic coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Plastic coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Pimpled rubber coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled aluminum, 200 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled plastic, 500 mm circumferencefa
Measuring wheel for shaft diameter 10 mm, Knurled plastic, 200 mm circumferencefa