Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

High temperature identification system OIT500-F113-B12-CB

OIT500-F113-B12-CB
  • High-temperature code carrier up to 500 °C (932 °F)
  • Sturdy and compact design
  • Integrated illumination
  • High operating range
  • Large sensing range
  • High depth of focus

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  OIT500-F113-B12-CB

Tuotekuvaus
Optical high temperature identification system, 200  to  450 mm
General specifications
Light sourceIntegrated LED lightning
Light typeinfrared
SymbologiesHole matrix
Data format: decimal
Data capacity: 6 (numerical)
Orientation: omnidirectional
Read distance200 ... 450 mm
Depth of focus± 50 mm
Reading field330 mm x 250 mm at max. read distance
Evaluation frequency5 Hz
Target velocitytriggered max. 0.5 m/s
Functional safety related parameters
MTTFd51 a
Mission Time (TM)10 a
Diagnostic Coverage (DC)0 %
Indicators/operating means
Operation indicatorLED green: supply
LED green: ready
Function indicatorYellow LED: trigger
Yellow LED: code read
Red LED: pre-fault
Red LED: group error
Electrical specifications
Operating voltage24 V DC ± 15% , PELV
Operating current250 mA without output drivers
Interface
Physical Ethernet
ProtocolTCP/IP
Transfer rate100 MBit/s
Input
Input voltageto be applied externally 24 V ± 15% PELV
Number/Type1 trigger input 2 control unit inputs , optically decoupled
Input currentapprox. 1 mA at 24 V DC
Output
Number/Type1 electronic output, PNP, optically decoupled
Switching voltageto be applied externally 24 V ± 15 % PELV
Switching current100 mA each output
Conformity
Shock resistanceEN 60068-2-27:2009
Vibration resistanceEN 60068-2-6:2008
Emitted interferenceEN 61000-6-4:2007+A1:2011
Noise immunityEN 61326-1:2013
Photobiological safetyEN 62471:2008 exempt group
Approvals and certificates
CE conformityCE
Ambient conditions
Ambient temperature0 ... 45 °C (32 ... 113 °F)
Storage temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Degree of protectionIP64
Connection8-pin Harting HAN
RJ-45
2 x 5-pin M12 socket
Supplied ferrite sleeve for suppression of the Ethernet cable
Material
Housingdiecast aluminum powder coated
Massapprox. 4000 g
Dimensions
Height101 mm
Width261 mm
Depth171 mm

Classifications

SystemClasscode
ECLASS 13.027280103
ECLASS 12.027280103
ECLASS 11.027280103
ECLASS 10.0.127280103
ECLASS 9.027280103
ECLASS 8.027280103
ECLASS 5.127280103
ETIM 9.0EC002999
ETIM 8.0EC002999
ETIM 7.0EC002999
ETIM 6.0EC002999
ETIM 5.0EC002999
UNSPSC 12.143211701

Details: OIT500-F113-B12-CB

Function

The OIT500-* stationary read device is an optical identification system that works using industrial vision methods and is used in automated manufacturing processes. The ambient conditions in automobile construction in particular, for example the cyclical temperature changes, often make the use of read-only tags with electronic components difficult if not impossible. For the OIT high-temperature identification system, read-only tags of solid metal plates with a perforated matrix are used, which are designed for use at temperatures of up to 500 °C and suitable for high mechanical stress.

Simple installation and commissioning without complicated, time-consuming Teach-In processes enable rapid entry. Pluggable connections for the rapid exchange of devices and a controller with simple command set via the Ethernet interface guarantee simple operation. A scratch-resistant, replaceable quartz glass panel and sturdy metal housing make the OIT500-* a robust, efficient identification system.

Informative Literature: OIT500-F113-B12-CB

Language Selection:
LiteratureKieliTiedostotyyppiTiedoston koko
Application Report - Reliable Optical Identication in High-Temperature EnvironmentsENGPDF218 KB

Product Documentation: OIT500-F113-B12-CB

Language Selection:
Product informationKieliTiedostotyyppiTiedoston koko
EtherNet/IP: OIT500 used with RTS-UP...ENGPDF640 KB
Reading window and permissible displacement of read-only tagsENGPDF116 KB
SIMATIC S7 Demo FB for EASY Mode OperationENGPDF169 KB
Brief Instructions
Instruction leaflet / BeipackzettelALLPDF483 KB
Manuals
Manual OIT****-F113-B12-CB*ENGPDF5550 KB

Design / Simulation: OIT500-F113-B12-CB

Language Selection:
CADKieliTiedostotyyppiTiedoston koko
CAD 3-D / CAD 3-DALLSTP1608 KB
CAD Portal / CAD PortalALLLINK---

Approvals: OIT500-F113-B12-CB

Language Selection:
Declaration of ConformitySertifikaatin nroKieliTiedostotyyppiTiedoston koko
EU Declaration of Conformity (P+F) / EU-Konformitäterklärung (P+F)DOC-2494DALLPDF34 KB
UK Declaration of Conformity (P+F) / UK-Konformitäterklärung (P+F)DOC-6625ALLPDF30 KB

Software: OIT500-F113-B12-CB

Language Selection:
Software ToolsJulkaisutiedotTiedostotyyppiTiedoston koko
Software OITControl for configuration and start of operation / Software OITControl zur Konfiguration und InbetriebnahmeV2.5.0ZIP12282 KB

Liitännäistuotteet: OIT500-F113-B12-CB

Accessories

Male cordset single-ended M12 straight A-coded, 4-pin, PVC cable greyfa
Female cordset, Harting, 8-pin, shielded, PVC cablefa
Ethernet bus cable RJ45 to RJ45 PROFINET-coded, 4-pin, PUR cable green, Cat5e, shielded, drag chain suitablefa
Male connector RJ45 straight 4-pin, Cat5, shielded, field-attachable, insulation displacement connection, Outdoorfa
Female connector, Harting, 8-pin, field attachablefa
Software for OIT high temperature identification systemfa
Replacement glass for series OIT300, OIT500 and OIT1500fa
Optical identification

From 2-D code readers and handhelds to barcode scanners and special solutions—find the ideal solution for your optical identification task.