Bluetooth®-Kit for VisuNet FLX Systems KIT-BT-V1-N0
- Compatible with VisuNet FLX housing AG-3200-*
- Consists of USB stick, cable and socket wrench for mounting
- Bluetooth® standards: v4.0 (Backwards compatible with Bluetooth® v2.0, v2.1 and v3.0)
- Certification: CE, FCC
- Prepared for mounting into VisuNet FLX blind plug dome
Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.
Lataa koko tietolomake PDF-tiedostona:
Ote tietolomakkeesta: Tekniset tiedot KIT-BT-V1-N0
| Tuotekuvaus |
|---|
| Bluetooth®-Kit for VisuNet FLX Systems |
| Supply | ||
|---|---|---|
| Power supply | 5 V DC (Power supply via USB) Crystal Oscillator: 20 MHz |
|
| Electrical specifications | ||
| Data rate | up to 3 MBit/s | |
| Operation frequency | 2.4 GHz to 2.485 GHz | |
| Communication | ||
| Bluetooth | Tx Output Power: 0 dBm (Bluetooth® v2.0, v2.1) and 4.7 dBm (Bluetooth® Smart) Rx Sensitivity: -82 dBm (Bluetooth® v2.0, v2.1) v4.0 low energy and v2.0, v2.1 wireless technologies |
|
| USB | USB 2.0 | |
| System requirements | ||
| Operating system | RM Shell 5 and newer Based on Microsoft® Windows 10 IoT Enterprise LTSC 2019 |
|
| Ambient conditions | ||
| Operating temperature | -30 ... 85 °C (-22 ... 185 °F) | |
| Data for application in connection with hazardous areas | ||
| Certificate | Certified for use in the VisuNet FLX System in ATEX and IECEx Zone 2/22 installations | |
| International approvals | ||
| Approved for | CE, FCC, RoHS, REACH and WEEE | |
| General information | ||
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. An additonal driver is required. Please refer to the software tool tab to install your specific driver. |
|
Classifications
| System | Classcode |
|---|---|
| ECLASS 13.0 | 19209090 |
| ECLASS 12.0 | 19209290 |
| ECLASS 11.0 | 19209290 |
| ECLASS 10.0.1 | 19209290 |
| ECLASS 9.0 | 19209290 |
| ECLASS 8.0 | 19209290 |
| ECLASS 5.1 | 27242392 |
| ETIM 9.0 | EC001467 |
| ETIM 8.0 | EC001467 |
| ETIM 7.0 | EC001467 |
| ETIM 6.0 | EC001467 |
| ETIM 5.0 | EC001467 |
| UNSPSC 12.1 | 43222605 |
Details: KIT-BT-V1-N0
Function
The Bluetooth® adapter allows your VisuNet FLX System to wirelessly communicate with other nearby Bluetooth® v2.0, v2.1 and Bluetooth® v4.1 enabled devices. The Bluetooth-Kit must be ordered additionally and can easily be installed. For the Bluetooth® application an additional driver is necessary. Please refer to the software tools to install your required driver. Simple pair the devices via Windows® Dialog.
Software: KIT-BT-V1-N0
| Device Description Files/Drivers | Julkaisutiedot | Tiedostotyyppi | Tiedoston koko |
|---|---|---|---|
| Driver Package / Windows 10 LTSC 2019 x64 (FLX) | 18-34056D | ZIP | 844470 KB |
| Driver Package / Windows 10 LTSC 2021 x64 (FLX) | 18-34768A | ZIP | 1580870 KB |
| Firmware | |||
| 500: RM Image 5.5 Patch / Bluetooth Driver LM506 | 18-34256 | ZIP | 150339 KB |
Liitännäistuotteet: KIT-BT-V1-N0
| Accessory of | ||||||
|---|---|---|---|---|---|---|
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
|
||||||
Pepperl+Fuchs Oy
Areenakatu 7
FI-37570 Lempäälä
Finland
info@fi.pepperl-fuchs.com
+358 20 7861 290
info@fi.pepperl-fuchs.com
+358 20 7861 291
Pepperl+Fuchs on dynaaminen ja tulevaisuuteen suuntaava yritys joka myy konepajateollisuuden, robotiikan ja teollisuusautomaation komponentteja. Tuotannon sujuvuus, tuotteiden korkea laatu ja niiden maailmanlaajuinen saatavuus ovat tuoneet yritykselle menestystä jo yli 70 vuoden ajan. Pepperl+Fuchs työllistää maailman laajuisesti yhteensä noin 6300 henkilöä. Globaalilla yrityksellä on tuotantolaitoksia Saksassa, Singaporessa, Yhdysvalloissa, Unkarissa, Indonesiassa ja Vietnamissa, joista suurin osa ovat ISO 9001-sertifioitu.