Serviceline
Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

5500 manifold, FM & CSA certified 5500-MAN-CD01-*

5500-MAN-CD01-*
  • Suitable for Class I,II/Div. 1 & 2 for hazardous locations
  • Certifications for FM and CSA
  • Manifold combines the solenoid valve for purging and needle valve for pressurization in one housing
  • Suitable for steel or plastic tubing
  • Mounting hardware, pneumatic fittings and tubing included

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot 5500-MAN-CD01-*

General specifications
Operating modeautomatic purging
Hazardous environmentgas or dust
Supply
Rated power24 VDC: 4.6 W
120 VAC: 6.8 VA, 60 Hz
230 VAC: 6.8 VA, 60 Hz
Voltage tolerance: +/-10%
Electrical specifications
Fuse ratingDC: 500 mA
AC: 80 mA
(fuse rating on 5500 control unit)
Pneumatic parameters
Protective gas supplyinstrument grade air or inert gas
Pressure requirement1.4 bar (20 psi) to 8.2 bar (120 psi)
Purge flow ratesolenoid valve : Cv (flow coefficient) = 1.4
needle valve : Cv (flow coefficient) = 0.25
Ambient conditions
Ambient temperature-20 ... 60 °C (-4 ... 140 °F)
Mechanical specifications
Connection typePneumatic
Input port: 3/8" Tube compression fitting
Output port: 3/8" Tube compression fitting

Electrical connection
½" NPTF thread connection w/ 24" (0.61m) flying leads
Degree of protectiontype 7 & 9
Material
Housing: anodized aluminum
3/8" compression fittings: 316 stainless steel
Pressure ports: 3/8" NPTF
Bulkhead fitting: 316 stainless steel
Mounting bolts: 1/4 - 20, 316 stainless steel
Sealing washers: UL recognized type 4X
Mass1250 g (2.8 lb)
Dimensionssee dimensions
International approvals
FM approvalFM3006713
Explosion proof: Class I, Divison 1, Group A-D, T4, Ta = 60C
DIP: Class II, Division 1, Groups F+G, T4, Ta = 60C
Nonincendive: Class I, Division 2, Groups A-D, T4, Ta = 60C

Suitable for Class II, Division 2, Groups F+G, T4, Ta = 60C
CSA approvalCSA 202633
Class I, Division 1, Groups A-D: Class II, Groups E,F,G
Class I, Division 2, Groups A-D

CAD+CAE: 5500-MAN-CD01-*

CADTiedostotyyppiTiedoston koko
DWG and STP files for the Purge 5500-MAN-CD01 / CAD-Dateien 2-DZIP130 KB

Approvals+Certificates: 5500-MAN-CD01-*

CertificatesSertifikaatin nroTiedostotyyppiTiedoston koko
Canada CSA202633LINK---
USA FM110221LINK---

Liitännäistuotteet: 5500-MAN-CD01-*

Accessory of
pa
Bebco EPS series Type Z & Ex pz purge and pressurization controllerpa

Bebco EPS® Purge+Pressurization Technology

Get to know the smartest way to ensure hazardous location protection and configure your individual purge and pressurization system!

Ex p Purge Units

5500 Series – Performance at the Push of a Button

Discover the all-new 5500 Series. These compact purging units enable fully automatic protection.