Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Singleturn absolute encoder ESS58-PZ

ESS58-PZ
  • Industrial standard housing ∅58 mm
  • Ethernet interface with Powerlink
  • 16 Bit singleturn
  • Two Ethernet connectors with built in hub
  • Recessed hollow shaft

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ESS58-PZ

General specifications
Detection typephotoelectric sampling
Device typeSingleturn absolute encoder
Functional safety related parameters
MTTFd130 a
Mission Time (TM)20 a
L10h1.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage10 ... 30 V DC , safe galvanic isolation per EN 50178
Power consumptionmax. 3 W
Linearity± 0.5 LSB (12 Bit) , ± 2 LSB (16 Bit)
Output codebinary code
Code course (counting direction)programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending)
Interface
Interface typeEthernet Powerlink
Resolution
Single turnup to 16 Bit
Overall resolutionup to 16 Bit
Transfer rate100 MBit/s
Connection
ConnectorEthernet: 2 sockets M12 x 1, 4-pin, D-coded
Supply: 1 plug M12 x 1, 5-pin, A-coded
Standard conformity
Degree of protectionDIN EN 60529,
shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)
housing side: IP65
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 2000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Operating temperature-40 ... 79 °C (-40 ... 174.2 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Materialhousing: powder coated aluminum
flange: aluminum
shaft: stainless steel
Massapprox. 550 g
Rotational speedmax. 12000 min -1
Moment of inertia30 gcm2
Starting torque≤ 3 Ncm (version without shaft seal)
Tightening torque, fastening screwsmax. 1.8 Nm
Shaft load
Angle offset± 0.9 °
Axial offsetstatic: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offsetstatic: ± 0.5 mm, dynamic: ± 0.2 mm

Documents: ESS58-PZ

ManualsKieliTiedostotyyppiTiedoston koko
Manual Powerlink EncodersENGPDF1473 KB
Handbuch Powerlink-DrehgeberGERPDF1538 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF416 KB

CAD+CAE: ESS58-PZ

CADTiedostotyyppiTiedoston koko
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ESS58-PZ

Statements of complianceSertifikaatin nroTiedostotyyppiTiedoston koko
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3630PDF76 KB

Software: ESS58-PZ

DriversJulkaisutiedotTiedostotyyppiTiedoston koko
XDD file / XDD-DateiV2.12ZIP11 KB

Liitännäistuotteet: ESS58-PZ

Accessories
Female cordset, M12, 5-pin, PVC cablefa
Female cordset, M12, 5-pin, PVC cablefa
Cable connector, M12, 4-pin, D-coded, shielded, non pre-wiredfa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Female connector, M12, 5-pin, field attachablefa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 15 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 14 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 12 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 10 mmfa