Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Absolute encoders ENA58IL-S***-Profibus

ENA58IL-S***-Profibus
  • Solid shaft
  • 30 Bit multiturn
  • Free of wear magnetic sampling
  • High resolution and accuracy
  • Mechanical compatibility with all major encoders with fieldbus interface
  • Status LEDs

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ENA58IL-S***-Profibus

General specifications
Detection typemagnetic sampling
Device typeAbsolute encoders
Linearity error≤ ± 0.1 °
UL File NumberE223176 "For use in NFPA 79 Applications only" , if UL marking is marked on the product.
Functional safety related parameters
MTTFd280 a at 40 °C
Mission Time (TM)12 a
L1055 E+8 revolutions at 40/110 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage10 ... 30 V DC
Power consumptionapprox. 2.5 W
Time delay before availability< 1000 ms
Output codebinary code
Code course (counting direction)adjustable
Interface
Interface typePROFIBUS DP
DPV0, DPV1, DPV2
Resolution
Single turnup to 16 Bit
Multiturnup to 14 Bit
Overall resolutionup to 30 Bit
Transfer rate≤ 12 MBit/s
Connection
ConnectorFor model with axial connector outlet or connection cover with radial connector outlet:
Profibus: 1 plug M12 x 1, 5-pin, B-coded; 1 socket M12 x 1, 5-pin, B-coded
Supply: 1 plug M12 x 1, 4-pin, A-coded
Terminal compartmentFor model with connection cover with radial cable outlet
Standard conformity
Degree of protectionDIN EN 60529 ,
axial connector outlet: IP54
connection cover and shaft seal: IP66/IP67
connection cover, no shaft seal: IP65
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 1000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source , if UL marking is marked on the product.
Ambient conditions
Operating temperature-40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Relative humidity98 % , no moisture condensation
Mechanical specifications
Material
HousingZinc plated steel, painted
FlangeAluminum
ShaftStainless steel
Massapprox. 300 g for model without connection cover
approx. 480 g for model with connection cover
Rotational speedmax. 12000 min -1 for IP54, IP65
max. 3000 min -1 for IP66/IP67
Moment of inertia30 gcm2
Starting torque< 3 Ncm
Shaft load
Axial40 N
Radial110 N
Accessories
Designationfor model without connection cover :
Terminator ICZ-TR-V15B, item number 127860 (optional)

Documents: ENA58IL-S***-Profibus

ManualsKieliTiedostotyyppiTiedoston koko
Manual Absolute rotary encoder with PROFIBUSENGPDF6740 KB
Handbuch Absolutwertdrehgeber für PROFIBUSGERPDF5427 KB
Instruction leaflets
Instruction leaflet / Beipackzettel ALLPDF1359 KB

CAD+CAE: ENA58IL-S***-Profibus

CADTiedostotyyppiTiedoston koko
CAD Portal / CAD PortalLINK---

Approvals+Certificates: ENA58IL-S***-Profibus

Statements of complianceSertifikaatin nroTiedostotyyppiTiedoston koko
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3270APDF86 KB
Certificates
CA UL General PurposeE223176LINK---
US UL General PurposeE223176LINK---

Software: ENA58IL-S***-Profibus

DriversJulkaisutiedotTiedostotyyppiTiedoston koko
GSD file, Encoders Pxx58, ENA58IL / GSD-Datei, Drehgeber Pxx58, ENA58IL2014-09ZIP8 KB

Liitännäistuotteet: ENA58IL-S***-Profibus

Accessories
Terminal resistor for PROFIBUSfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring steel coupling, Universally suitable for backlash-free rotation transmission, Highly vibration-isolating, Well misalignment compensation, Low torsion spring stiffness, Small reset forcesfa
Spring disk coupling, Very high torsion spring stiffness, Suitable up to 12.000 rpm, Well misalignment compensation, Vibration- isolating, Electrically insulatingfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Bellows coupling, Backlash-free, angle synchronous rotation transmission, Very high torsion spring stiffness, Material stainless steel and anodized aluminumfa
Precision coupling, Precision couplingfa
Stainless steel bellows coupling, Backlash-free, angle synchronous rotation transmission, Optimall misalignment compensation, Very high torsion spring stiffness, Small reset forces, Vibration- isolatingfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Helical coupling, Universally suitable for backlash-free rotation transmission, Vibration- isolating, Optimall misalignment compensation, Medium torsion spring stiffness, Small reset forcesfa
Measuring wheel for shaft diameter 6 mm, Pimpled rubber coating, 200 mm circumferencefa
Measuring wheel for shaft diameter 6 mm, Knurled aluminum, 200 mm circumferencefa
Measuring wheel for shaft diameter 6 mm, Knurled plastic, 200 mm circumferencefa
Spring-loaded mounting bracket with a diameter of 36 mmfa