Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Multiturn absolute encoder ESM58-TZ

ESM58-TZ
  • Industrial standard housing ∅58 mm
  • Ethernet interface with TCP/IP
  • 30 Bit multiturn
  • Integrated webserver
  • Recessed hollow shaft

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH, also apply to Pepperl+Fuchs AG.

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot  ESM58-TZ

General specifications
Detection typephotoelectric sampling
Device typeMultiturn absolute encoder
Functional safety related parameters
MTTFd120 a
Mission Time (TM)20 a
L101.9 E+11 at 6000 rpm and 20/40 N axial/radial shaft load
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage10 ... 30 V DC
Power consumptionmax. 4 W
Linearity± 0.5 LSB (12 Bit) ,
Output codebinary code
Code course (counting direction)programmable,
cw ascending (clockwise rotation, code course ascending)
cw descending (clockwise rotation, code course descending)
Interface
Interface typeTCP/IP
Resolution
Single turnup to 16 Bit
Multiturn14 Bit
Overall resolutionup to 30 Bit
Physical Ethernet
Transfer rate10 MBit/s / 100 MBit/s
Connection
ConnectorEthernet: 1 socket M12 x 1, 4-pin, D-coded
Supply: 1 plug M12 x 1, 5-pin, A-coded
Standard conformity
Degree of protectionDIN EN 60529,
shaft side: IP64 (without shaft seal)/IP66 (with shaft seal)
housing side: IP65
Climatic testingDIN EN 60068-2-3, no moisture condensation
Emitted interferenceEN 61000-6-4:2007
Noise immunityEN 61000-6-2:2005
Shock resistanceDIN EN 60068-2-27, 100 g, 6 ms
Vibration resistanceDIN EN 60068-2-6, 10 g, 10 ... 1000 Hz
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source
Ambient conditions
Operating temperature0 ... 60 °C (32 ... 140 °F) Standard , with Option T -40 ... 85 °C (-40 ... 185 °F)
Storage temperature-40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Materialhousing: powder coated aluminum
flange: aluminum
shaft: stainless steel
Massapprox. 500 g
Rotational speedmax. 12000 min -1 without shaft seal
max. 3000 min -1 with shaft seal
Moment of inertia30 gcm2
Starting torque≤ 3 Ncm without shaft seal
≤ 5 Ncm with shaft seal
Tightening torque, fastening screwsmax. 1.8 Nm
Shaft load
Angle offset± 0.9 °
Axial offsetstatic: ± 0.3 mm, dynamic: ± 0.1 mm
Radial offsetstatic: ± 0.5 mm, dynamic: ± 0.2 mm

Documents: ESM58-TZ

Instruction leafletsKieliTiedostotyyppiTiedoston koko
Instruction leaflet / Beipackzettel ALLPDF1112 KB
Instruction manuals
Instruction Manual Ethernet encoders, TCP/IPENGPDF1509 KB
Betriebsanleitung Ethernet-Drehgeber, TCP/IPGERPDF1517 KB

Approvals+Certificates: ESM58-TZ

Statements of complianceSertifikaatin nroTiedostotyyppiTiedoston koko
EU-Declaration of conformity / EU-KonformitätserklärungDOC-3630PDF76 KB
Certificates
CA UL General PurposeE223176LINK---
US UL General PurposeE223176LINK---

Software: ESM58-TZ

Software ToolsJulkaisutiedotTiedostotyyppiTiedoston koko
communication tool / Kommunikations-Tool01/2006ZIP15 KB

Liitännäistuotteet: ESM58-TZ

Accessories

Cable connector, M12, 4-pin, D-coded, shielded, non pre-wiredfa

Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa

Female connector, M12, 5-pin, field attachablefa
Female cordset, M12, 5-pin, PVC cablefa
Female cordset, M12, 5-pin, PVC cablefa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 15 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 14 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 12 mmfa
Accessories set for ∅58 absolut rotary encoder with recessed hollow shaft 10 mmfa

Function: ESM58-TZ

In addition to the CANopen-, DeviceNet-, PROFIBUS- and AS-Interface encoders, we have broadened our product line of bus-capable absolute encoders with the ESM58 for Ethernet.

Absolute rotary encoders deliver an absolute step value for each angle setting.

This device has a maximum basic resolution of 65536 steps per revolution (16 bits) and codes up to 16384 revolutions (14 bits). Thus the overall resolution amounts to 30 bits. On account of the high number of measuring steps resulting (more than 1 billion), this type of encoder can be used to divide very long linear distances into small measuring steps.

The Ethernet interface of this absolute encoder supports the TCP/IP protocol. The integrated webserver provides Java applets, which allow the whole parameterisation of the encoder via any web browser. In addition to various functions like resolution adjustment, e -mail-services, change of the IP address and many others, the following operation modes can be selected:

  • Polled mode

  • Cyclic mode

  • Change of state mode

The absolute encoder is mounted directly onto the application shaft, without any coupling. Rotation of the absolute encoder is prevented by a torque rest.