Serviceline
Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Measuring wheel 9101, 10

9101, 10
  • Plastic coating
  • 500 mm circumference

Lataa koko tietolomake PDF-tiedostona:


Ote tietolomakkeesta: Tekniset tiedot 9101, 10

Tuotekuvaus
Measuring wheel for shaft diameter 10 mm
Mechanical specifications
Surfaceplastic
Hytrel 4056
DiameterD = 159 mm
Circumference500 mm
Width25 mm
Shaft diameterd = 10 mm

Liitännäistuotteet: 9101, 10

Accessory of
Industrial standard housing ∅58 mm, ATEX approval, Up to 5000 ppr, Servo or clamping flange, 10 V ... 30 V with RS 422 interface, Output type: RS 422, incrementalfa
1024 or 2048 signal periods, Flameproof enclosure, Worldwide certification: ATEX, IECEx, KOSHA, NEPSI, Degree of protection IP66 / IP67, High shaft load capacity, Output type: sine / cosine
fa
Up to 5000 ppr, Flameproof enclosure, Worldwide certification: ATEX, IECEx, KOSHA, NEPSI, Degree of protection IP66 / IP67, High shaft load capacity, Output type: push-pull, incremental or RS 422, incremental
(see "Output circuit" in the ordering information)fa
Up to 25 ppr, ATEX approval, Intrinsically safe, NAMUR interface in accordance with DIN EN 60947-5-6, Output type: NAMUR (SJ2-N)fa
Industrial standard housing ∅58 mm, ATEX approval, Up to 5000 ppr, Servo or clamping flange, 10 V ... 30 V with short-circuit proof push-pull output, Output type: push-pull, incrementalfa
Industrial standard housing ∅58 mm, PROFIBUS interface, 16 Bit singleturn, Ex approval for zone 2 and zone 22, Speed transferfa
Industrial standard housing ∅58 mm, ATEX approval, Up to 5000 ppr, Servo or clamping flange, 5 V with RS-422 interface, Output type: RS 422, incrementalfa
Up to 5000 ppr, Flameproof enclosure, Worldwide certification: ATEX, IECEx, EX-approval for mining, Degree of protection IP66 / IP67, Output type: push-pull, incremental or RS 422, incremental
(see "Output circuit" in the ordering information)fa
Stainless steel version, especially suitable for applications in the food industry, Cleaning compatible according to EHEDG (European Hygienic Engineering & Design Group), Approval for ECOLAB detergents, IP69K Protected, Industrial standard housing ∅58 mm, Output type: push-pull, incremental or RS 422, incrementalfa
Industrial standard housing ∅58 mm, PROFIBUS interface, 30 Bit multiturn, Ex approval for zone 2 and zone 22, Speed transferfa
Sturdy design, Up to 5000 ppr, 10 V ... 30 V with short-circuit proof push-pull output, Output type: push-pull, incrementalfa