Yhteydenotto, Koneautomaatio
+358 20 7861 290
Yhteydenotto, Prosessiautomaatio
+358 20 7861 291

Stationary read device OPC120P-F201-B17

  • Reading on highly reflective surfaces with new polarization filter
  • PROFINET interface with integrated switch
  • Reads Data Matrix codes at high speeds of up to 10 m/s at 50 readings/s

Please note: All product-related documents, such as certificates, declarations of conformity, etc., which were issued prior to the conversion under the name Pepperl+Fuchs GmbH or Pepperl+Fuchs AG, also apply to Pepperl+Fuchs SE.

Lataa koko tietolomake PDF-tiedostona:

Ote tietolomakkeesta: Tekniset tiedot  OPC120P-F201-B17

Optical Print Inspector, reading of Data Matrix codes, PROFINET, speeds up to 10 m/sec, polarization filter
General specifications
Polarization filteryes
SymbologiesData Matrix
Read distance70 ... 180 mm
Nominal distance: 120 mm
Reading fieldMinimum read field: 28 mm x 45 mm
Read field at nominal distance: 45 mm x 70 mm
Maximum read field: 65 mm x 105 mm
Modul sizeMinimum module size: 0.2 mm
Functional safety related parameters
MTTFd40.5 a
Mission Time (TM)8 a
Diagnostic Coverage (DC)0 %
Electrical specifications
Operating voltage24 V DC ± 15% , PELV
No-load supply currentmax. 300 mA
Power consumption6 W
Interface type100 BASE-TX
ProtocolPROFINET IO Real-Time (RT) Conformance class A
Transfer rate    100 MBit/s      
Interface 2
Interface typeUSB Service
Switching thresholdlow: < 10 V, high: > 15 V
Cable lengthmax. 30 m
Switching typePNP
Cable lengthmax. 30 m
Compliance with standards and directives
Standard conformity
Noise immunityEN 61326-1:2006
Emitted interferenceEN 61000-6-4:2007/A1:2011
Degree of protectionEN 60529
Laser classIEC 60825-1:2007
Approvals and certificates
UL approvalcULus Listed, General Purpose, Class 2 Power Source, Type 1 enclosure
CCC approvalCCC approval / marking not required for products rated ≤36 V
Ambient conditions
Ambient temperature0 ... 45 °C (32 ... 113 °F)
Storage temperature-20 ... 85 °C (-4 ... 185 °F)
Mechanical specifications
Degree of protectionIP65
Connection8-pin, M12x1 connector, standard (supply+IO) ,
4-pin, M12x1 socket, D-coded (LAN) ,
4-pin, M12x1 socket, D-coded (LAN)
Installation4 x M6 threading
Massapprox. 200 g


ECLASS 11.027280103
ECLASS 10.0.127280103
ECLASS 9.027280103
ECLASS 8.027280103
ECLASS 5.127280103
ETIM 8.0EC002999
ETIM 7.0EC002999
ETIM 6.0EC002999
UNSPSC 12.143211701

Approvals+Certificates: OPC120P-F201-B17

Statements of complianceSertifikaatin nroTiedostotyyppiTiedoston koko
EU-Declaration of Conformity / EU-KonformitätserklärungDOC-2711APDF81 KB

Software: OPC120P-F201-B17

Software ToolsJulkaisutiedotTiedostotyyppiTiedoston koko
GSD file for OPC PROFINET device / GSD-Datei für OPC PROFINET-Gerät2015-04ZIP11 KB
Integration example as function block / Integrationsbeispiel als Funktionsbaustein2015-04ZIP1074 KB
Software Vision Configurator / Software Vision ConfiguratorV6.0.00.5183ZIP28628 KB

Liitännäistuotteet: OPC120P-F201-B17


Female connector, M12, 8-pin, shielded, field attachablefa
Female cordset single-ended M12 straight A-coded, 8-pin, PUR cable grey, shieldedfa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Connection cable, M12 to RJ-45, PUR cable 4-pin, CAT5efa
Y connection cablefa

Function: OPC120P-F201-B17

With the Optical Print Inspector, Pepperl+Fuchs provides the solution to code reading and detection tasks in the field of printing, paper, and packaging.

Whether reading 1-D and 2-D codes at high speeds, reading reliably on reflective surfaces and at varying intervals, or performing various detection tasks — with the Optical Print Inspector, you always have the right Vision Sensor close at hand.